Instructions / Assembly

5. Install (2) two 6' long soffit panels.
Soffit
Step 21 Install Sidewall Trim & Soffit
96-3/4' Long Corner Trim
1. Install a 96-3/4" long 1x4 trim board flush with the
corner trim on the back of the building. This trim board
has blue paint on one end. Locate a 7/16" x 3" x 8"
gauge block packed in the hardware bag. Place
this gauge block under the truss overhang and
butt the corner trim against it.
It will be easier to install the soffit panel if the corner and sidewall trim are installed first.
This enables the soffit panels to rest on the trim where it meets the building. See lower detail.
3. Install 1x4-12' trim along the top of the side-
wall and cut another 4' long board to finish.
7/16" Gauge Block
1x4 Trim
Bevel Edge
4. Install 10-5/8" soffit panels under the truss
overhangs. Use 5d galv. nails. Install the soffit
with the beveled edge toward the ends of the
trusses. Cut a 4' long panel to the center of
the truss.
2. Install 4' long 1x4 trim along the top
of the sidewall. Use the gauge block
to set where the trim will be installed.