Instructions / Assembly

Install Roofing — Not Supplied in Kit
1. Install metal roof edging along the end walls and
the front edge of the roof sheathing.
2. Install shingles according to the instructions on the wrapper.
If you need more detailed instructions on installing shingles,
there are good publications at book stores or newsstands.
Roof Sheathing
1x6 Trim
Metal Roof Edge
2x4 Overhang
4 2x6 Bottom Plates 55-3/4"
2 2x4 Ridge Boards 56-1/2"
2 2x4 Bottom Plates 33-1/2"
4 2x3 Sidewall Overhang 45-1/4"
4 2x3 Gable Overhang 22-3/4"
4 1x4 Sidewall Fascia 45-1/4"
4 1x4 Gable Trim 23-3/4"
4 1x3 Side Corner Trim 37"
4 1x3 Front Corner Trim 34-1/4"
4 7/16" Roof Sheathing 20-1/2"x 58-3/4"
4 3/8" Sidewall Siding 4" x 47" angled
2 3/8" Front Siding 33-1/2" x 49"
2 1 lb. box 8d Galv. Box
2 1 lb. box 6d Galv. Box
64 1/2" White Screws for Windows
40 2-1/2" Wood Screws
4 3-1/2" Wood Screws
1 2" Bit for Wood Screws
64 5"x7" Step Flashing
2 7"x41" Front Dormer Flashing
2 ea. 18" x 23" Windows
2 ea. 18" Sunburst Windows
4 ea. Pre-built Angle Sidewall Panels
2 ea. Pre-built Frontwall Panels
Material Packaged In Dormer Component Kit