Instructions / Assembly

Step 2 Assemble Roof Gables
2. Install 38-3/4" and 50" long 2x4 gable studs. Secure
gable studs with 1" x 4" metal drive-on plates.
3. Install the upper wood gusset, on one side.
5. Lay gable on flat surface with gussets
facing down.
6. Remove 2x4 blocks used to hold truss
parts in place. Secure (3) three blocks,
evenly spaced, to the bottom 2x4 using
2-1/2" long wood screws.
Gusset Facing Down
2x4 Block
38-3/4" Gable Stud
1. Select another 12' long 2x4, with angle cuts on both ends. Install pre-cut rafters and
bottom gussets as in previous step. Install the bottom gussets on one side only.
50" Gable Stud
2x2 Board
1x4 Drive-on
Plate
1x4 Drive-on Plate
33"
4. Repeat steps to assemble another roof gable.
If installing the optional gable window, install
a 2x2 board (packed with window) between
the 53" long gable studs. Cut to fit.