Instructions / Assembly

flush
3. Install 95" long 1x4 white pine trim
boards as corner trim to the rear
walls. Install trim flush with the
siding on the sidewalls.
4. Repeat to install trim boards to the
front wall panel.
Back
Wall
Side
Wall
Filler
1x4 Corner Trim
Step 16 Install Corner Trim
Tie Plate
Step 15 Install 2x4 Tie Plates
1. Install a 2x4-12' board on the front wall, at the left corner of the building as shown below.
Cut and install another 12' long 2x4 flush with the right corner. Use 10d sinkers.
2. Install (3) three 2x4-8' boards across the top of the back wall. Cut the last 2x4 flush with the
end of the end wall panel.
3. Cut a 6' long 2x4 in half and install 3' long 2x4s on the 12' end wall as shown below. Cut
and install a 6' long 2x4 between the 3' long 2x4s. Repeat on the opposite end wall.
2x4-3' Tie Plate
Cut 2x4-6' to Fit
IMPORTANT: Lower Trim Must Be Installed Before Installing Roof Gables!
1. Tack 1-1/2" x 48" filler strips on top of the siding on the back wall.
2. Install (2) two 72-3/8" long 1x4 white pine trim boards flush with the siding on the sidewalls
and flush with the top of the 2x4 tie plate. Use 8d galv. nails to install all trim.
2x4-8 Tie Plates
2x4-12' Tie Plate
Flush
1x4 Trim Boards