Owners manual

4' Long Wall Panel
12' Long Wall Panel
4' Long Wall Panel
12' Long Wall Panel
Nail Along Siding Edge
Step 9B Set Walls For 12' x 16' Building
1. Secure wall panels together at the corners. Use (4) four 10d coated nails per corner. Nail
wall panels to the floor. Nail through the bottom plate. Space 10d sinkers 24" apart.
2. Install the 2x4 door header between the front wall panels. Nail through the wall stud into
the ends of the header. Toenail into the top wall plates. Wall trim, installed later, will hide
where the siding butts the front wall panels.
3. Install a 2x4-6' board at the door opening to hold the wall straight.
4. If you are constructing a 16' long building, nail along the siding edge where it overlaps
the 12' long panel.