Quick Start Guide

ManualsBrandsBest Buy essentials ManualsFlashlights & Portable Lights350-Lumen LED Flashlight - Black

Features

• 350 lumen output makes your ashlight ideal

for general indoor and outdoor use.

• Premium metal construction provides

durability and dependability.

• IPX4 rating provides protection in dusty and

damp environments (not waterproof).

• Three brightness levels plus a strobe (ashing)

mode provide a wide range of lighting

options.

• Carrying case and strap makes it easy to carry

and keep track of your ashlight.

Installing the batteries

1 Turn the end cap on the bottom of your ashlight

counterclockwise to open the battery compartment, then

remove the battery holder.

2 Insert three AAA batteries (included) into the battery holder.

Make sure that you insert the batteries so that the + and – match

the graphic to the right.

3 Insert the battery holder into the ashlight body with the

spring-loaded point facing the front of the ashlight. Replace the

end cap, then turn the cap clockwise to tighten.

Notes:

• Do not mix batteries of dierent types because the batteries might leak.

• Do not mix old and new batteries.

• Remove batteries when the charge is depleted.

• If your ashlight is not going to be used for an extended period of time,

remove the batteries.

Tip: Use non-rechargeable lithium or premium rechargeable batteries to

extend the run time of your ashlight.

Using your ashlight

1 Press the On/O button.

2 Quickly press and release the Mode ( ) button one or more times to select a brightness level

(high, medium, or low), or press and hold the button for about 1.5 seconds to select strobe

mode.

Note: To exit strobe mode, press and hold the Mode ( ) button again. Your ashlight returns to the last

brightness level you selected.

3 To turn o your ashlight, press the On/O button.

Open

Battery

holder

Body

Package contents

• LED Flashlight

• Carrying case

• Carrying strap

• Best Buy essentials AAA batteries (3)

• Quick Setup Guide

Before using your new product, please read these instructions to prevent any damage.

Flashlight

Quick Setup Guide

BE-BFL100AM

End cap

Magnet

Clip

Body

Mode button

Head

Carrying strap

On/O button

Summary of content (2 pages)

PAGE 1
Flashlight Quick Setup Guide BE-BFL100AM Features Installing the batteries • 350 lumen output makes your flashlight ideal for general indoor and outdoor use. • Premium metal construction provides durability and dependability. • IPX4 rating provides protection in dusty and damp environments (not waterproof ). • Three brightness levels plus a strobe (flashing) mode provide a wide range of lighting options. • Carrying case and strap makes it easy to carry and keep track of your flashlight.
PAGE 2
Troubleshooting Specifications Safety information One-year limited warranty My flashlight does not turn on or I cannot select a brightness level. • Make sure that you installed the batteries correctly. • Make sure that your flashlight is turned on. • Replace the batteries. The flashlight body is overheating. If you set the brightness level to high, the LED generates a moderate amount of heat. This is normal. If your flashlight is too hot to hold, turn it off and wait 10 minutes for it to cool.