Quick Start Guide
Installing your lter
• It is normal for black carbon particles to appear on the outside of your new lter
during shipping. Simply wipe it away before installation.
• This water lter is designed to prevent leaks. Please twist in place securely to
ensure a proper t.
1 Unlatch the plastic lter cover on the refrigerator and let it swing down.
2 Rotate the old lter 1/4 turn counterclockwise, then pull it straight out.
3 Push the new lter into the refrigerator until it stops, then rotate it 1/4 turn
clockwise.
Note: Filter connections are larger to prevent leaks. You may need to twist the lter hard
to make sure that the connection is secure.
4 Swing the plastic lter cover up until it snaps closed.
5 Reset your refrigerator’s “change lter” light (if it has one). See “Resetting your
change lter indicator” for more information.
6 Run two gallons (7.6 L) to three gallons (11.3L) of water through your
refrigerator to remove air and loose carbon pieces.
Before using your lter
If your refrigerator has a change lter indicator, reset it. See “Resetting your lter
indicator” for instructions.
Resetting your lter indicator
Note: These are the most common lter reset instructions. If the instructions don’t work for
your refrigerator brand, see the documentation that came with your refrigerator.
• Amana® / Maytag®: Press and hold the dispenser lock and auto light buttons at
the same time until the lter indicator ashes (about four seconds).
OR
Press and hold the dispenser lock and water buttons at the same time until the
lter indicator ashes (about four seconds).
• Kitchenaid®: Press the light switch ve times within ten seconds. If the fridge
has a lter button, press and hold it for 5-10 seconds.
• Sears® / Kenmore®: The water lter reset for Sears/Kenmore refrigerators varies
by model. See the documentation that came with your refrigerator.
Storage and maintenance
• Replace your lter every three to six months to prevent bacteria and fungus
growth in your lter, supply lines, and storage tank.
• Stored lters do not expire. Keep your unused lters in a cool, dark, and dry
place until you need them.
• If you do not use your water dispenser for more than four days, run two gallons
(7.6 L) of water before using it to prevent bad tasting water.
Package contents
• Refrigerator water lter(s)
(1 or 2 pack)
• Quick Setup Guide
Compatibility
Compatible with the following
branded lters:
Amana® / Maytag®
UKF8001AXX, UKF8001AXX-750, UKF8001,
8001P, UKF8001AXXP, UKF9001, UKF9001AXX,
WF50, OWF50, WF51, OWF51, WF50-NI300,
OWF50-NI300, WF50-KNI300, WF50-NI500,
OWF50-WI500, WF50-WI500, WF50-KWI500,
67002269, 67002671, 67003523, 67003526,
67003527, 67003528, 67003591, 67003727,
67006474, 67006637, 12589201, 12589203,
12589206, 12589208, 12589210, 480181700573,
4902821
KitchenAid®
4396395, 8171032, 8171249
Sears® / Kenmore®
46-9005, 469005, 9005, 9005P, 46-9006, 469006,
9006, 9006P, 46-9992, 469992, 9992, 9992P,
469005750, 469005-750, 46-9005-750,
469006750, 469006-750, 46-9006-750,
04609005000, 04609006000
Before using your new product, please read
these instructions to prevent any damage.
Refrigerator
Filter
Quick Setup Guide
BE-MTUKF531