User Manual
Table Of Contents
- Contents
- ENGLISH
- Safety information and specifications
- SAVE THESE INSTRUCTIONS
- Features
- Installation instructions
- STEP 1: Option 1 - Mount the bracket arms to the soundbar
- STEP 1: Option 2 - Mount the bracket arms to a hanger
- STEP 2 - Preparing your TV (go to Step 3 if your TV is not already mounted on the wall).
- STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 4 - Select screws, washers, and spacers
- STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 6 - Final adjustments, tightening, and hanging the TV
- Specifications
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- Índice
- Información de seguridad y especificaciones
- GUARDE ESTAS INSTRUCCIONES
- Características
- Instrucciones de instalación
- PASO 1: Opción 1 - Coloque los brazos de montaje a la barra de sonido
- PASO 1: Opción 2 - Coloque los brazos de montaje a un soporte
- Paso 2 - Emparejamiento de su televisor (vaya al paso 3 si su televisor todavía no esta montado en la pared)
- Paso 3: determine si su televisor tiene una parte posterior plana, irregular u obstruida
- Paso 4: selección de los tornillos, arandelas y espaciadores
- PASO 5: Opción 1: instalación de la ferretería de montaje para televisores con una parte posterior plana
- PASO 5: Opción 2: Instalación de la ferretería de montaje para televisores con partes posteriores irregulares o obstruidas
- PASO 6 - Ajustes finales, apriete y colocación del televisor
- Especificaciones
- GARANTÍA LIMITADA DE UN AÑO
www.bestbuy.com/bestbuyessentials
15
STEP 4 - Select screws, washers, and spacers
1 Select the hardware necessary for your TV (screws, washers, and spacers). A limited
number of TVs come with mounting hardware included. (If there are screws that
came with the TV, they are almost always in the holes on the back of the TV.)
If you don't know the correct length and diameter of the mounting screws your TV
requires, test various sizes by hand threading the screws.
Select one of the following types of screws:
Select one of the following types of washers:
For an irregular or obstructed TV back, use the spacers (N) provided.
2 Remove the screws.
3 For a flat back TV, go to STEP 5 - Option 1: Attaching the mounting hardware to TVs
with a flat back on page 16.
-OR-
For an irregular or obstructed back, go to STEP 5 - Option 2: Attaching the
mounting hardware to TVs with irregular or obstructed backs on page 18.
M4 × 16 mm screws (I) M6 × 25 mm screws (L)
M4 × 40 mm screws (P) M6 × 40 mm screws (R)
M5 × 16 mm screws (J) M6 × 50 mm screws (S)
M5 × 40 mm screws (Q) M8 × 40 mm screws (T)
M6 × 16 mm screws (K)
M4/M5 washers (G)M6/M8 washers (H)
M4/M5 washers large (GG) M6/M8 washers large (HH)
CAUTION: To avoid potential personal injuries and property damage, make sure that
there are adequate threads to secure the brackets to your TV. If you encounter resistance,
stop immediately and contact customer service. Use the shortest screw and spacer
combination to accommodate your TV. Using hardware that is too long may damage your
TV. However, using a screw that is too short may cause your TV to fall from the mount.
Screw is too
long
Screw fits
correctly
Screw is too
short