User Manual
Table Of Contents
- Contents
- ENGLISH
- Safety information and specifications
- SAVE THESE INSTRUCTIONS
- Features
- Installation instructions
- STEP 1: Option 1 - Mount the bracket arms to the soundbar
- STEP 1: Option 2 - Mount the bracket arms to a hanger
- STEP 2 - Preparing your TV (go to Step 3 if your TV is not already mounted on the wall).
- STEP 3 - Determine whether your TV has a flat back or an irregular or obstructed back
- STEP 4 - Select screws, washers, and spacers
- STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back
- STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed backs
- STEP 6 - Final adjustments, tightening, and hanging the TV
- Specifications
- ONE-YEAR LIMITED WARRANTY
- ESPAÑOL
- Índice
- Información de seguridad y especificaciones
- GUARDE ESTAS INSTRUCCIONES
- Características
- Instrucciones de instalación
- PASO 1: Opción 1 - Coloque los brazos de montaje a la barra de sonido
- PASO 1: Opción 2 - Coloque los brazos de montaje a un soporte
- Paso 2 - Emparejamiento de su televisor (vaya al paso 3 si su televisor todavía no esta montado en la pared)
- Paso 3: determine si su televisor tiene una parte posterior plana, irregular u obstruida
- Paso 4: selección de los tornillos, arandelas y espaciadores
- PASO 5: Opción 1: instalación de la ferretería de montaje para televisores con una parte posterior plana
- PASO 5: Opción 2: Instalación de la ferretería de montaje para televisores con partes posteriores irregulares o obstruidas
- PASO 6 - Ajustes finales, apriete y colocación del televisor
- Especificaciones
- GARANTÍA LIMITADA DE UN AÑO
18
www.bestbuy.com/bestbuyessentials
BE-SBM112
www.bestbuy.com/bestbuyessentials
18
STEP 5 - Option 2: Attaching the mounting hardware to TVs
with irregular or obstructed backs
1 Place the spacers (N) and mount spacers (F) over the top two screw holes on the
back of the TV.
2 Place the spacers (N) and the soundbar bracket assembly (A) over the bottom two
screw holes on the back of the TV. To make sure the arms are not visible when on
the wall, align the arms so they reach the bottom or corners of the TV, but do not
over hang the edges.
3 Align your existing TV wall mount bracket with the screw holes on the back of the
TV.
4 Install screws (P, Q, R, S, or T) and washers (G, GG, H, or HH) through the top two
holes in the wall mount bracket. The TV brackets should be level on the back
of the TV.
Do not tighten.
5 Install screws (P, Q, R, S, or T) and washers (G, GG, H, or HH) through the bottom
two holes in the wall mount bracket.
You’ll need
G (4)
H (4)
P
(4)
R (4)
Phillips screwdriver
or
or
or
S (4)
Level
or
T (4)
F (2)
N Spacers (4)
or
or
GG (4)
or
HH (4)
Q (4)