Quick Start Guide
Installing the lter
• It is normal for black carbon particles to appear on the outside of your new lter
during shipping. Simply wipe them away before installation.
• This water lter is designed to prevent leaks. Please twist in place securely to
ensure a proper t.
1 Twist the old lter a quarter-turn counterclockwise.
2 Pull the old lter straight down and discard.
3 Carefully remove the plastic cap from the new lter before installation.
4 Push the new lter up into the refrigerator until it stops.
5 Twist the lter a quarter-turn clockwise.
6 Run about two to three gallons of water through your refrigerator’s water
dispenser to remove air and loose carbon pieces. The water may be cloudy and
sputter until the air is removed.
7 Reset your “change lter” indicator (if your refrigerator has one). See below.
Before using your lter
If your refrigerator has a change lter indicator, reset it.
See “Resetting your lter indicator” for instructions.
Resetting your lter indicator
These are the most common lter reset instructions. If the instructions don’t work
for your refrigerator brand, see the documentation that came with your refrigerator.
• For Samsung: Press and hold the ICE TYPE and CHILD LOCK buttons for three
seconds.
The water lter indicator should turn green.
Note: Only hold these buttons for three seconds. Holding these buttons for ve seconds
cancels the reset. If you cancel the reset, repeat the procedure.
Storage and maintenance
• Replace your lter every three to six months to prevent bacteria and fungus growth
in your lter, supply lines, and storage tank.
• Stored lters do not expire. Keep your unused lters in a cool, dark, and dry place
until you need them.
• If you do not use your water dispenser for more than four days, run two gallons of
water before using it to prevent bad tasting water.
Before using your new product, please read these
instructions to prevent any damage.
Package contents
• Refrigerator lter(s) (1 or 2 pack)
• Quick Setup Guide
Compatible with
these lters:
Samsung®:
DA29-00003G, DA29-00003D,
DA29-00003B, DA29-00003A,
DA29-00003A-B, DA2900003A,
DA2900003B, TAD29-00003A,
TADA29-00003B, DA97-06317A,
DA61-00159, DA61-00159A,
DA61-00159A-B, HAFCU1,
HAFCU1/XAA, HAFIN2/EXP,
WF289, WSS-1
Flat size (W×H): 7.09 × 7.48 in. (180 × 190mm.)
Final folded size: 2.35 × 3.74 in. (60 × 95 mm.)
Refrigerator
Filter
Quick Setup Guide
BE-SSDA531
BE-SSDA531_21-0145_QSG_V1_EN.ai 1 4/21/2021 9:37:38 AMBE-SSDA531_21-0145_QSG_V1_EN.ai 1 4/21/2021 9:37:38 AM