Quick Start Guide

Package contents
• Refrigerator water lter(s)(1 or 2 pack)
• Quick Setup Guide
Compatibility
Compatible with the following
branded lters:
Whirlpool®
4396508, 4396508P, 4392857, 4392857R,
4396510, 4396510P, 8212491, 2255520,
SBS002, SBS003, SBS004, 481281729632,
4396918, 4396562, 4396563, 2200203,
2203220, 2203980, 2305766, 2305767,
2305768, 2255518, 2186444, PWF-NL240V,
PNL240V, WF-NL240V, WFNL240V, NL240V,
WF-NL240, WFNL240, NL240, WF-NL300,
WFNL300, NL300, PWF-L400V, PL400V,
WFL400V, WFL400V, L400V, WF-L400, WFL400,
L400, WF-L500, WFL500, L500, WF-300BR,
(lter system that uses 4396508)
KitchenAid®
4396547, 4396163, 4396509, 4396509P,
4396548, 4396164, 2203221, 2255709
Sears® / Kenmore®
46-9902, 469902, 9902, 9902P, 04609902000,
46-9908, 469908, 9908, 9908P, 04609908000,
46-9010, 469010, 9010, 9010P, 04609010000
Installing your lter
• It is normal for black carbon particles to appear on the outside of your new
lter during shipping. Simply wipe it away before installation.
• This water lter is designed to prevent leaks. Please twist in place securely to
ensure a proper t.
1 Twist the old lter a quarter-turn counterclockwise, then pull it straight out.
2 Remove the reusable color-keyed knob from the end of your old lter, then
slide it on your new lter.
3 Discard the old lter.
4 Carefully remove the plastic cap from the new lter before installation.
5 Push the new lter into the refrigerator until it stops.
6 Twist the lter a quarter-turn clockwise.
7 Run about two gallons (7.6 L) to three gallons (11.3L) of water through your
refrigerator’s water dispenser to remove air and loose carbon pieces. The
water may be cloudy and sputter until the air is removed.
8 Reset your “change lter” indicator (if your refrigerator has one). See below.
Before using your lter
If your refrigerator has a change lter indicator, reset it. See “Resetting your lter
indicator” for instructions.
Resetting your lter indicator
Note: These are the most common lter reset instructions. If the instructions don’t work for
your refrigerator brand, see the documentation that came with your refrigerator.
• Whirlpool® and Kitchen Aid®: Press the light switch ve times in 10 seconds.
If the fridge has a lter button, press and hold it for 5-10 seconds.
• Kenmore®: The water lter reset for Kenmore refrigerators varies by model.
See the documentation that came with your refrigerator.
Storage and maintenance
• Replace your lter every three to six months to prevent bacteria and fungus
growth in your lter, supply lines, and storage tank.
• Stored lters do not expire. Keep your unused lters in a cool, dark, and dry
place until you need them.
• If you do not use your water dispenser for more than four days, run two
gallons (7.6 L) of water before using it to prevent bad tasting water.
Before using your new product, please read
these instructions to prevent any damage.
Refrigerator
Filter
Quick Setup Guide
BE-WP508531