Installation Guide

Window Curtain Panel Installation Guide
1. Remove panel(s) from package
2. Use iron on low heat to straighten and remove creases/wrinkles from packaging
3. Hang curtain panel(s) on window hardware
o GROMMET – Feed rod through metal rings
o ROD POCKET – Feed rod through rod pocket opening at top of panel
o BACK TAB – Feed rod through tabs on back of curtain panel
o TABTOP – Feed rod through tabs on top of curtain panel
o TIETOP – Tie tietops around rod
For Window Measuring
• Hardware will generally extend 4 in. beyond the window frame. (2” inches on either side)
• For a full look, plan on two to four times the fabric width to the width of your window.
• Panels are usually hung 4 in. above the window frame.
• Shorter panels are meant to hang 4 in. below the window sill.
• Typically you will want to use an even number of panels per window.
Width Up to 29” 30”-39” 40”-48” 49”-72” 73”-96” 97”-120” 121”-144”
1 Panel
1 Panel
1-2 Panel
2-3 Panel 2-3 Panel
3-4 Panel 4-5 Panel
You will need