Service manual

17
F3: Weight Display
This screen will display 1 of 3 screens, depending if the lift has the hydraulic pressure sensing option present.
If all the posts in the system have the pressure sense option, the screen (A) will display showing the weight on
the post and the total weight of the system. If only the present column has the pressure sense option, then
screen (B) will display, showing only the post weight. If you are at a column that does not have a pressure
sense option, then screen (C) will display. (Note the tolerance of +/- 3% in weights shown)
Refer to F9 for factory settings enabling and disabling the pressure sense option in each post.
A B C
F4: Voltage Display
This screen will display the current voltage (VDC) of the battery
system.
i.e. The display to the left shows the post at 23.05 VDC.
(Note the tolerance of +/- 0.5 VDC)