Service manual

19
F9: Factory Settings (Factory Password Protected)
This screen displays factory settings. This is only accessible with
the factory password (See F10).
F10: Password
This screen allows entry of the password which will give access to
the PLC configuration settings and screens F9 and F10. Enter either
the Distributor Password to give limited access to F7 screen, or the
Factory Password to give access to all password protected screens.
ERROR MESSAGES:
The following are a list of error messages that may display if certain situations arise.
Post Count Error:
This screen appears if the user says “NO” to the initial Active Posts
response screen.
(See System Activation above)