Service manual

Post Overload Error: (Optional)

This screen will appear if any post has a weight on it that exceeds

the capacity of the post. Post capacities are set in the factory setting

menu. Raising and parking are not allowed in this situation, only

lowering. (This error will only be present if the lift has the pressure

sensing option.)

i.e. The display to the left shows that post 3 & 4 are overloaded.

Battery Warning:

This indicates that one of the post’s batteries are low on charge and

need to be recharged. (Also, refer to battery meter above control

screen.) Pressing the “OK” button will allow lift function, but only

for a few cycles until the “Battery Low” error occurs (see below).

i.e. The display to the left warns that post 6 battery is low.

Battery Low Error:

This indicates that one of the post’s batteries is too low on charge

and needs to be recharged. The lift will not function until this post

is fully recharged.

i.e. The display to the left shows that post 6 battery is low and lift

will not function until post 6 is fully recharged.