Specifications

K
K12
Parker Hannifin Corporation
Pneumatic Division
Wadsworth, Ohio
www.parker.com/pneumatics
Pneumatic Actuator Products
Air Motors
Technical Data
Working pressure Max. 7 bar (Max. 6 bar
in explosive atmospheres)
Working temperature -30 °C to +100 °C
Ambient temperature -20 °C to +40 °C
in explosive atmospheres
Medium 40 µm filtered, oil mist or
dry unlubricated compressed air
Table and Diagram Data
All values are typical values, with a tolerance of ±10%
Option
Other variants on request
Material Specification
Planetary gearbox for:
P1V-S060A0010 /30 /48
P1V-S120A0012 /32 Stainless steel, X46Cr13
Planetary gearbox for last planet stage incl. installation flange
P1V-S020A0011 /06
P1V-S030A0023 /10 Black oxidised steel (not stainless)
All other housings Stainless steel, X12CrMoS17
Spindle* Hardened stainless steel, X20Cr13
Key* Hardened stainless steel
X6CrNiMoTi17-12-2
External seal Fluor rubber, FPM
Internal steel parts High grade steel (not stainless)
Planetary gear grease USDA-h1 approved
* P1V-S020A0011/06 and P1V-S030A0023/10
Key and Shaft High grade steel (not stainless)
Screws in housing
in last planet stage Surface treated steel (not stainless)
Flange bracket Stainless steel, X12CrMoS17
Foot bracket Stainless steel, X5CrNi18
Screws for bracket Stainless steel DIN A2
Choice of Vanes
0 = Standard
Standard vanes = These motors are of the vane type for intermittent
lubrication-free operation. They can operate 70% of the time for up
to 15 minutes without lubrication. With lubrication, these motors can
operation 100% of the time.
Z = Spring Loaded (Standard) Vanes
Standard vanes = These motors are of the vane type for intermittent
lubrication-free operation. They can operate 70% of the time for up
to 15 minutes without lubrication. With lubrication, these motors can
operation 100% of the time.
Spring loaded vanes = All vanes are spring loaded to ensure that they
remain pressed against the cylinder when the motor stops. The spring
loaded vane option also prevents the vanes from sliding down in their
track if vibration is introduced. The spring loaded vanes therefore
provide a higher starting torque, improved starting and low speed
characteristics, because the leakage over the vanes is reduced to a
minimum.
C = Vanes for Continuous Lubrication-Free Operation
C vanes = This motor is equipped with vanes for continuous
lubrication-free operation. (To obtain the longest possible service life,
we recommend no oil in the air.)
M = Multi (Combination of Z+C)
C vanes = This motor is equipped with vanes for continuous
lubrication-free operation. (To obtain the longest possible service life,
we recommend no oil in the air.)
Spring loaded vanes = All vanes are spring loaded to ensure that they
remain pressed against the cylinder when the motor stops. The spring
loaded vane option also prevents the vanes from sliding down in their
track if vibration is introduced. The spring loaded vanes therefore
provide a higher starting torque, improved starting and low speed
characteristics, because the leakage over the vanes is reduced to a
minimum.
Catalog 0900P-E
Technical Data