Specifications

K43
Parker Hannifin Corporation
Pneumatic Division
Wadsworth, Ohio
www.parker.com/pneumatics
Pneumatic Actuator Products
Air Motors
Air
Motors
K
Data for Drilling Motor P1V-S008N
Max.
Power
Free
Speed
Version
Drilling in
Steel
Drilling in
Aluminium
Air Consumption
at Max.. Power
Conn.
Min
Pipe ID
Weight
Order Code
kW rpm mm mm l/s mm Kg
0.080 24000 Collet Chuck 3 mm — 3 3.8 M8 x 0.75* 4 0.20
P1V-S008N0Q00
0.080 7000 Collet Chuck 3 mm 3 3 3.8 M8 x 0.75* 4 0.20
P1V-S008N0700
0.080 1900 Collet Chuck 3 mm 3 3 3.8 M8 x 0.75* 4 0.22
P1V-S008N0190
0.080 1300 Collet Chuck 3 mm 3 3 3.8 M8 x 0.75* 4 0.22
P1V-S008N0130
* 2 push in nipples (F28PMB6M8SP) for plastic pipe Ø6/4 supplied
Average Speed
Material
Drilling Ømm
1 2 3 4 5 6 7 8 9 10
35 m/min
Unalloyed Steel up to 500 N/mm²
11000 5500 3700 2800 2200 1900 1600 1400 1200 1100
28 m/min
Unalloyed Steel from 500 to 700 N/mm²
8800 4400 3000 2200 1800 1500 1300 1100 975 880
25 m/min
Unalloyed Steel over 700 N/mm²
7800 3900 2600 2000 1600 1300 1100 975 865 780
14 m/min
Alloyed Steel from 700 to 900 N/mm²
4400 2200 1500 1100 880 735 630 550 490 440
11 m/min
Alloyed Steel from 900 to 1100 N/mm²
3400 1700 1100 850 680 570 485 425 380 340
7 m/min
Stainless Steel
2200 1100 730 550 440 365 315 275 245 220
22 m/min
Cast Iron up to 180 N/mm²
7000 3500 2300 1700 1400 1200 1000 875 780 700
12 m/min
Cast Iron over 180 N/mm²
3800 1900 1300 950 760 630 540 475 420 380
50 m/min
Copper, Red Metal, Bronze, Brass
16000 8000 5300 4000 3200 2700 2300 2000 1800 1600
90 m/min
Rough Light-alloy Metal, Screw Brass²
28000 14000 9000 7000 5600 4800 4000 3500 3100 2800
165 m/min
Hardened Light-alloy Meta
52000 26000 17300 13000 10400 8700 7400 6500 5800 5200
210 m/min
Magnesium Alloy¹
66000 33000 22000 16500 13200 11000 9400 8300 7400 6600
Installation brackets, see page K33
Dimensions, see page K51
Permitted shaft loadings, see page K59
Service kits, see page K62
Standard Speeds for HSS Spiral Drills
1 Speeds for processing two-component plastics, cardboard or plastic-coated
fabrics plaster, HSS drills must not be used - use a high-speed steel drill
fitted with a hard metal K10 instead
2 Double the values for thermoplastics
Drilling Motor P1V-S008N
Our smallest and most versatile drilling motor for small-scale drilling
operations.
The standard collet chuck is for 3 mm shaft diameter.
For other diameters, select a different collet chuck as an accessory.
The motor has a port for a 6 mm hose to remove the exhaust air
to a silencer.
NOTE! All technical data is based
on a working pressure of 6 bar.
Catalog 0900P-E
Drilling Motors
Accessories for Drilling Motor P1V-S008N
Collet Chucks Order Code
Collet Chuck Ø2 mm
P1V-6/314693
Collet Chuck Ø3 mm
Standard
Collet Chuck Ø3/32"
P1V-6/314694
Collet Chuck Ø1/8"
P1V-6/314407