Specifications

K
K44
Parker Hannifin Corporation
Pneumatic Division
Wadsworth, Ohio
www.parker.com/pneumatics
Pneumatic Actuator Products
Air Motors
Drilling Motor P1V-S017N
A small drilling motor for small-scale, lighter drilling operations.
The standard collet chuck is for 6 mm shaft diameter.
For other diameters, select a different collet chuck as an accessory.
The motor has a built-in silencer for exhaust air. If lower noise levels
are required,
or if you want the exhaust air to be collected, the relevant
accessories are available.
Data for Drilling Motor P1V-S017N
Max.
Power
Free
Speed
Version
Drilling in
Steel
Drilling in
Aluminium
Air Consumption
at Max.. Power
Conn.
Min
Pipe ID
Weight
Order Code
kW rpm mm mm l/s mm Kg
0.170 24000 Collet Chuck 6 mm — 4 5.0 G1/4o 6 0.38
P1V-S017N0Q00
0.170 6000 Collet Chuck 6 mm 3 5 5.0 G1/4o 6 0.38
P1V-S017N0600
0.170 4000 Collet Chuck 6 mm 4 6 5.0 G1/4o 6 0.38
P1V-S017N0400
0.170 1500 Collet Chuck 6 mm 4 6 5.0 G1/4o 6 0.38
P1V-S017N0150
0.170 1000 Collet Chuck 6 mm 4 6 5.0 G1/4o 6 0.38
P1V-S017N0100
0.170 660 Collet Chuck 6 mm 4 6 5.0 G1/4o 6 0.38
P1V-S017N0066
Accessories for Drilling Motor P1V-S017N
Collet Chucks Order Code
Collet Chuck Ø3 mm
P1V-6/312681
Collet Chuck Ø4 mm
P1V-6/312684
Collet Chuck Ø5 mm
P1V-6/312686
Collet Chuck Ø6 mm
Standard
Collet Chuck Ø1/8"
P1V-6/312682
Collet chuck Ø1/4"
P1V-6/312689
Other Accessories
Outlet Hose
P1V-6/806112
Seal for Outlet Hose
P1V-6/823221
Outlet Connection Parallel
P1V-6/302923A
Dimensions, see page K51
Permitted shaft loadings, see page K59
Service kits, see page K62
NOTE! All technical data is based
on a working pressure of 6 bar.
Catalog 0900P-E
Drilling Motors