Specifications

K
K46
Parker Hannifin Corporation
Pneumatic Division
Wadsworth, Ohio
www.parker.com/pneumatics
Pneumatic Actuator Products
Air Motors
Installation brackets, see page K33
Dimensions, see page K53
Permitted shaft loadings, see page K59
Service kits, see page K62
NOTE! All technical data is based
on a working pressure of 6 bar.
Drilling Motor P1V-S025N
A small drilling motor for moderately heavy drilling operations.
The standard collet chuck is for 6 mm shaft diameter.
For other diameters, select a different collet chuck as an accessory.
The motor has a built-in silencer for exhaust air. If lower noise levels
are required,
or if you want the exhaust air to be collected, the relevant
accessories are available.
Data for Drilling Motor P1V-S025N
Max.
Power
Free
Speed
Version
Drilling in
Steel
Drilling in
Aluminium
Air Consumption
at Max. Power
Conn.
Min
Pipe ID
Weight
Order Code
kW rpm mm mm l/s mm Kg
0.250 17000 Collet Chuck 6 mm — 6 6.3 G1/4o 6 0.80
P1V-S025N0H00
0.250 4800 Collet Chuck 6 mm 4 6 6.3 G1/4o 6 0.80
P1V-S025N0480
0.250 2500 Collet Chuck 6 mm 6 6 6.3 G1/4o 6 0.80
P1V-S025N0250
0.250 1400 Collet Chuck 6 mm 6 6 6.3 G1/4o 6 0.80
P1V-S025N0140
0.250 700 Collet Chuck 6 mm 6 — 6.3 G1/4o 6 0.80
P1V-S025N0070
0.250 350 Collet Chuck 6 mm 6 — 6.3 G1/4o 6 0.80
P1V-S025N0035
Accessories for Drilling Motor P1V-S025N
Collet Chucks Order Code
Collet Chuck Ø3 mm
P1V-6/312681
Collet Chuck Ø4 mm
P1V-6/312684
Collet Chuck Ø5 mm
P1V-6/312686
Collet Chuck Ø6 mm
Standard
Collet Chuck Ø1/8"
P1V-6/312682
Collet Chuck Ø1/4"
P1V-6/312689
Other Accessories
Outlet Connection Straight
P1V-6/313179A
Outlet Hose Ø23 x 28 mm 0.75 m long
P1V-6/806110
Outlet Connection Parallel
P1V-6/388378A
Catalog 0900P-E
Drilling Motors