Specifications

K
K50
Parker Hannifin Corporation
Pneumatic Division
Wadsworth, Ohio
www.parker.com/pneumatics
Pneumatic Actuator Products
Air Motors
Catalog 0900P-E
Grinding Motors
Grinding Motor P1V-S009N
The grinding motor is used for small-scale point grinding and small-
scale milling where
the high speed is an advantage. It has proved to be very useful for
drilling small holes
and milling thin slits in PCBs in the electronics industry.
In this application, the high speed means that the holes and slits are
free of
burrs on the underside.
Data for Grinding Motor P1V-S009N
Max.
Power
Free
Speed
Version
Point
Grinding
Diameter
Max.
Milling
Diameter
Max.
Air Consumption
at Max. Power
Conn.
Min
Pipe ID
Weight
Order Code
kW rpm mm mm l/s mm Kg
0.090 100000 Collet Chuck 3 mm 5 3 2.0 Pipe 6/4 4 0.3
P1V-S009N0A000
Grinding motor P1V-S020N
This grinding motor is used when larger-scale point grinding is
required.
The motor can also be used for light milling operations.
The motor has a built-in silencer for exhaust air.
Dimensions, see page K54
Permitted shaft loadings, see page K59
NOTE! All technical data is based
on a working pressure of 6 bar.
Dimensions, see page K54
Permitted shaft loadings, see page K59
Service kits, see page K62
NOTE! All technical data is based
on a working pressure of 6 bar.
Data for Grinding Motor P1V-S020N
Max.
Power
Free
Speed
Version
Point
Grinding
Diameter
Max.
Milling
Diameter
Max.
Air Consumption
at Max. Power
Conn.
Min
Pipe ID
Weight
Order Code
kW rpm mm mm l/s mm Kg
0.200 30000 Collet Chuck 6 mm 25 10 6.3 G1/40 6 0.5
P1V-S020N0X00
Accessories for Grinding Motor P1V-S020N
Collet Chucks Order Code
Collet Chuck Ø3 mm
P1V-6/312681
Collet Chuck Ø4 mm
P1V-6/312684
Collet Chuck Ø5 mm
P1V-6/312686
Collet Chuck Ø6 mm
Standard
Collet Chuck Ø1/8"
P1V-6/312682
Collet Chuck Ø1/4"
P1V-6/312689