Warranty

Best Pro Lighting Limited Warranty

Limited Warranty

The warranty guarantees that products will be free of defects in material and workmanship when the

products are installed, operated, and maintained according to applicable codes and regulations, supplied

instructions, and under conditions of ‘normal use’ – for the time periods defined below.

Visit our "warranty" page for details

Limitations and Conditions

• Warranty does not apply to any Products that have been subjected to misuse, mishandling,

misapplication, neglect (including but not limited to improper maintenance), accident,

vandalism, improper installation, improper packaging of Products returned to Seller,

modification (including but not limited to use of unauthorized parts or attachments), or

adjustment or repair by someone other than Seller.

• Warranty does not cover damage due to power surges, power spikes, or the application of

voltages outside the acceptable range of voltages as defined in product specifications. Also

not covered, is the application of DC (direct current) power when AC (alternating current)

power is required (or vice versa), and the use of non-approved electronic transformers and

dimmers.

• Warranty does not cover ‘Acts of God’ such as lightning, floods, hail, tornado, fire,

earthquake, hurricanes, and other extreme weather events.

• Warranty does not cover water damage to Products (not specifically sold as Underwater

Products) that have been submerged in water, mounted in an incorrect orientation, improperly

assembled, or been subject to excessive contact with water spray from irrigation nozzles or

drainage flows.

• Transformers must be installed according to provided instructions – evidence of improper

mounting or wiring voids the warranty. Transformer housings, when mounted on oceanfront

properties must be protected from direct contact with salt spray.

PAGE 1
Best Pro Lighting Limited Warranty Limited Warranty The warranty guarantees that products will be free of defects in material and workmanship when the products are installed, operated, and maintained according to applicable codes and regulations, supplied instructions, and under conditions of ‘normal use’ – for the time periods defined below.
PAGE 2
• It is normal for natural brass finishes to patina, oxidize, and change colors. It is also normal of other types of finishes such as powder coatings to discolor or blister when exposed to sunlight, irrigation systems, reclaimed water, sea water, acid rain, and other sources of aggressive agents. These coatings may also be affected by physical factors resulting in damage to the coatings. These changes are not covered by warranty.
PAGE 3
damages, including, but not limited to, loss of profits, business revenues or savings, promotional and/or manufacturing expenses, overhead, injury to reputation and/or loss of customers, even if seller has been advised of the possibility of such damages or such damages are otherwise foreseeable, and regardless of whether a claim for any such liability is premised upon breach of contract, warranty, negligence, strict liability or other theory of liability; (B) any claims, demands, or actions against buyer by