23456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 12345678901234567890123456789012123456
WOW Platinum Reversible Part Drawing Description Qty Hardware List P-1 P-2 P-3 Right Leg Left Leg Tray 1 EA A Long Socket Screw 4 EA B Short Socket Screw 4 EA C Flange 2 EA D Knob 2 EA E 3” Locking Caster 4 EA H Allen Wrench 1 EA I Caster Wrench 1 EA J Lock Washer 1 EA 1 EA P-4 Cross Bar 1 EA P-5 Framed Board 1 EA Should you require assistance during assembly, please call our Customer Service Department Monday - Friday 8 a.m. - 5 p.m.
Platinum Reversible Assembly Diagram Illustration # 1 READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. P-1 P-2 1. To Assemble: Identify and Separate all the Parts and Hardware. P-4 2. Install Cross bar (P-4) to the Legs (P-1) and (P-2) by using Long Socket Screws (A). Tighten with Allen Wrench (H). See illustration # 1. A A 3.
Illustration # 3 4. Detach 2 Screws from each side of Framed Board’s brackets (P-5) with Allen Wrench (H) as shown in illustration # 3. Screws P-5 5. Install Flange (C) on each side of the board using the same Screws from Step 4 and tighten with Allen Wrench (H). See illustration # 4. C Screws Illustration # 4 Do not use unless all screws are tight. At least every six months, check all screws to be sure they are tight.
Platinum Reversible P-5 D 6. Separate the Legs (P-1) and (P-2) slightly in order to insert the Flange (C) bolts on sides of Framed Board (P-5) through the flange hole on each legs. Fasten the Knobs (D) to secure the board in place. See illustration # 5. C C D Illustration # 5 7. Assemble Tray (P-3) to the Legs (P-1) and (P-2) with using 4 Short Socket Screws (B) and tighten with Allen Wrench (H). See illustration # 6.
Platinum Reversible 669RU and 669RG B 669RU 669RG A 75” 79” B 38 1/2” 80 1/2” A 25 1/2” 6 669RU_04-22-10
