Specification Sheet

MODEL AEWPD
AEWPD Telescopic Flue Cover for use with WPD38I and WPD39M
Series Outdoor Range Hood.
Model Length Width Collapsed Maximum
Height Height
AEWPD3054SB 13” 25” 30” 54”
AEWPD3054SBE 16” 25” 30” 54”
This Kit Contains:
1. (1) Telescopic Flue Cover Bottom
2. (1) Telescopic Flue Cover Top
3. (2) Mounting Brackets
(1) Hardware Bag (Service Part S97019391) Including:
4. (4) #10 x 2” Screws
5. (8) # 8 x 3/8” Screws
Follow hood installation manual steps 1-9 prior to installing
Telescopic Flue Cover, and steps 11-12 to nalize hood
installation.
4 TOTAL
5
5
3
4
2
1
5
24-3/4"
CENTER BRACKETS
WITH CENTER OF HOOD
BOTH BRACKETS
2" FOR AEWPD3054SBE
1/2" FOR AEWPD3054SB
TOP VIEW OF HOOD
HOOD
WALL
Step 1:
Remove protective coating from
Telescopic Flue Cover. Be careful
not to scratch surface of stainless
steel.
Step 2:
Fasten Mounting Brackets (Item 3)
to ceiling using dimensions shown
and (4) #10 x 2” Screws (Included
Item 4). Screws must be fastened
into building structure.
Step 3:
Fasten Telescopic Flue Cover to
Hood using: (4) # 8 x 3/8” Screws
(included Item 5). Arrows show hole
locations on Hood. Hand tighten
screws only.
Step 4:
Extend Telescopic Flue
Cover and fasten to
Mounting Brackets (Item 3)
with (4) # 8 x 3/8” Screws
(Included Item 5).

Summary of content (4 pages)