Installation Guide 99045198A

AGPCC34W INSTALLATION INSTRUCTIONS
1) Remove the glass panels from the package by removing the (6) retention clips.
2) Open up stainless panel of the hood.
3) Remove and keep the (3) screws at each hinge (will reuse for the glass panels).
4) Install the glass panel by using the outer most holes to mount the panel hinges.
5) Using (2) of the screws used in step 3, install each hinge onto the hood.
Make sure that the screws are tight (15-20 in-lbs).
6) Repeat for the other glass pane.