Specifications
SPECIFICATION SHEET
CC45I SERIES
Built-in
RIPORRE
BEST | Hartford, WI | 1 800-558-1711 | www.BestRangeHoods.com
BEST | Drummondville, Qc | 1 866-737-7770 | www.BestRangeHoods.ca
This design embodies the clean European style that has become a traditional favorite. Riporre is a wall hood rarely
seen with the power and features it includes.
SIZE MODEL NO. GREASE FILTERS (replacement)
36 in. CC45I90SB B08087772 (4 required)
99046067A
FEATURES
Finish 430 Stainless Steel no. 4 Brushed
Mounting type Wall and cabinet
Telescopic Flue Accomodates 8-ft. to 9-ft. ceilings
Blower type Centrifugal
Control type Infrared, Touch-Free, 4-Functions:
• Lights, low/medium/high
• Blower, 4-speed selection
• Delay-off Timer
• Filter Clean Indicator reset
Filter Clean
Indicator
Reminds when grease filters should be
cleaned
Heat Sentry™ Turns blower on to high speed when
excess cooking heat is detected.
Lighting 3-level 8.5W LED
Grease Filters Dishwasher-safe, mesh lined filters
PERFORMANCE
Duct Orientation Size Damper
CFM @ 0.1 Ps
Sones
CFM @ 0.1 Ps
Sones
CFM @ 0.1 Ps
Sones
CFM @ 0.1 Ps
Sones
Vertical - Round
8 in.
Included
(Boost) 500
7.5
(High Speed) 380
4.0
(Med. Speed) 300
2.5
(Low Speed) 200
0.8
AC INPUT
120V, 60 Hz - 3.2 AMPS
OPTIONAL ACCESSORIES (sold separately)
Remote Control ACR3
Make-up Air Damper MD6TU, MD8TU, MD10TU
Charcoal Filters AFCCC45
Non-Ducted Recirculation Kit ANKCC45
Flue Extension for up to
38-in. high cabinet
AECC45SB
RECOMMENDED MOUNTING HEIGHT
24-in min. to 36-in. max. from cooktop to bottom of hood
(See instructions for more info based on various ceiling heights)
LIMITED WARRANTY
5-year
2-year (labour only)
(See installation manual for full warranty text.)
FOR INDOOR USE ONLY
13
36-1/8
34
min. 16 - max. 28
14-1/4
2
16-1/2
10-3/8
14-3/8
0
0.5
1
1.5
2
2.5
3
3.5
0 100 200 300 400 500 600 700
Static Pressure
(in. H
2
O - Inches of Water Gauge)
Airflow
(CFM - Cubic Feet per Minute)
HVI-2100 CERTIFIED RATINGS comply with new testing
technologies and procedures prescribed by the Home Ventilating
Institute, for off-the-shelf products, as they are avaialable to
consumers. Product performance is rated at 0.1 in. static
pressure, based on tests conducted in AMCA’s state-of-the-
art test laboratory. Sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
NOTE: Dimensions
shown in inches.