CP3 Installation Guide

- 8 -
CP37 MODEL
For each blower, using a 5/16” socket, remove all blower mounting screws from the inner
top of the power pack front and rear brackets. Set aside the screws.
HD0297
For each blower, slide it to disengage its flanges from the retaining brackets. Set aside the
blowers.
BLOWERS FRONT BRACKET
BLOWERS REAR BRACKET
HD0298
12. REMOVE THE BLOWER(S)
In order to ease the power pack alignment with existing ductwork, unplug and disassemble the blower(s) from the power pack
before installing the custom hood.
HE0085
Unplug the blower(s).
HD0282
RIGHT SIDE
MOUNTING SCREW
LOCATION
Using a 5/16” socket, remove all blower
mounting screws from the inner top of the
power pack. Set aside the screws.
HD0269
LEFT SIDE MOUNTING
SCREW LOCATION
Slide the blower to disengage its flange from
the retaining bracket. Set aside the blower.
HD0270
CP34 AND CP35 MODELS