Specification Sheet
SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
BEST Hartford, Wisconsin www.bestrangehoods.com 800-558-1711
BEST Drummondville, QC, Canada www.bestrangehoods.ca 866-737-7770
CP55IQ SERIES
RANGE HOODS
All-in-one design includes liner, blower, filtration,
controls, lighting, and damper for easy installation
into custom canopy hoods. Intended for all
residential applications, including commercial-
style cooking surfaces.
FEATURES
•
Cabinet mount - custom applications
•
Finish: 430 Stainless Steel no. 4 Brushed
•
Max blower airflow: 800 CFM*
•
120 V, 60 Hz, 4.7 Amps
•
Widths: 34-3/8”, 40-3/8”
•
Depth: 19-1/4”
•
8” round duct connector with backdraft damper
•
1-level LED lighting (2 LED modules, 6 Watts max.) 3000K
nominal
•
Easily accessible, dishwasher safe stainless steel
hybrid baffle filters with handles
•
4-speed electronic blower control
•
Quiet iQ6 blower system with high efficiency BLDC motor
•
Heat Sentry
TM
- automatically turns blower to high speed
when excess cooking heat is detected
•
Delay timer control automatically shuts off range hood after
10 minutes
•
Special control indicates when it’s time to clean the filter
•
For indoor use only
02H 99045170D
19¼
34
/
8
,
40
/
8
C
L
4½
7/8
7/8
12
11
4
7
/
8
3
3
OPTIONS (Not included with hood. Purchase separately.)
•
Non-ducted kit - ANKCP55
- Charcoal filters included
•
Charcoal filters - AFCROUND2
•
Remote control (Model ACR3)
•
Universal Make-Up Air Damper (Models MD6TU,
MD8TU, MD10TU)
iQ6 - 600 CFM Blower System
providing:
•
Best in class quiet operation.
•
Up to 30% faster smoke and odor
removal than comparable models.
•
Up to 22x more energy efficient than comparable models.
•
Guaranteed Performance System (GPS) technology
calibrates the hood system to every installation to provide
up to 30% more CFM than standard range hoods.
•
Using a duct reducer with this hood may prevent the product
from calibrating.
NOTE: DIMENSIONS SHOWN ARE IN INCHES
PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are avaialable to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted
in AMCA’s state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.
* Where noted performance rating is not HVI certified but was established in accordance with HVI Standardized test procedure.
See next page for blower performances.