Specifications Sheet

Page 10
INTERNAL BLOWER (PF6) - REMOTE MOUNTED - SIDE OUTLET
• Ducting connected to right side
of Downdraft
(Ducting connects to left side or rear
of downdraft in same manner.)
• Flex Blower mounted in a side
cabinet or other remote, in-line
location
• Ducted to Wall Cap or Non-Duct
Recirculation Kit
MODEL ANKD
Non-Duct Recirculation Kit
with Kickspace Grille
(sold separately)
(Only required for non-duct
applications. “Front” discharge
shown. Kit can also be rotated
for “Left” , “Right” or “Rear” discharge.)
MODEL AVDKD219 *
1-7/8-inch x 19-inch
Rectangular Adapter
(sold separately)
(Only required to
extend duct along
back of cabinet.)
MODEL AEDD2 *
1-7/8-inch x 19-inch
Rectangular Duct
(sold separately)
(Only required to
extend duct along
back of cabinet.)
MODEL AVDKD8
1-7/8-inch x 19-inch
to 8-inch Round Transition
(sold separately)
MODEL PF6
Flex Blower
(sold separately)
(Mounted in
adjacent cabinet)
MODEL PF6
Flex Blower
(sold separately)
(Mounted in
adjacent cabinet)
MODEL 408 *
8-inch Round
Straight Duct
MODEL 408 *
8-inch Round
Straight Duct
MODEL 432 *
8-inch Round
Elbow
* As required - sold separately.
MODEL 643 *
8-inch Round
Wall Cap
MODEL AEWD5
5-foot Extension Cable
(sold separately)
(Only required if
electrical panel is mounted
in a remote location - more
than 2-feet away from downdraft.
Use up to 2 extension cables
connected together.)
Electrical Panel
(Can be mounted in
remote location.)
MODEL 408 *
8-inch Round
Straight Duct