Specifications Sheet

Page 4
OPTIONAL ACCESSORIES
OPTIONAL
ACCESSORY
DESCRIPTION /
APPLICATION
MODELS
ACRD
ACRDBLS
REMOTE UP/DOWN CONTROL
Use when you cannot reach the UP/
DOWN Button on the downdraft chimney.
Can be located on counter top, face of
cabinetry or on the side cabinet of an
island. Cut-out size: 2¼" H x 2" W.
Cannot be used where remote control
will interfere with cooking, where hot
pans could be set, or where hot liquids
could be spilled on the control.
Remote wiring connects with
6-pin connection.
MODELS
ATSKD30
ATSKD36
ATSKD48
GAS COOKTOP SEAL KIT
Recommended for use with all gas
cooktops. Includes trim bracket and
trim seal.
30", 36" & 48" widths.
MODELS
MD6T
MD8T
MD10T
MAKE-UP AIR DAMPER
Use to provide make-up air (when called
for) to keep the home comfortable by
allowing the downdraft to operate at
optimum levels.
Directwire design works with select
BEST
®
downdrafts to balance indoor
air pressure by providing interlocked
make-up air; damper opens automatically
when the range hood is activated.
8" & 10" round diameters.
Connects to 2 CONTACTS on
ELECTRICAL PANEL.
MAKE-UP
AIR DAMPER
CONTACTS
MODELS
ATKD30SB
ATKD36SB
ATKD48SB
RANGE TRIM KIT
Use with free-standing range - where a
gap is present between back of range
and downdraft.
30", 36" & 48" widths.
OPTIONAL
ACCESSORY
DESCRIPTION /
APPLICATION
MODEL AEWD5
EXTENSION CABLE - 5-FT.
Use where electrical panel is remotely
mounted. Extends electrical panel
cable an additional 5 feet.
MODEL ANKD
NON-DUCT
RECIRCULATING KIT
Use where ducting is not feasible or
available. Mount to toe kick or base of
a cabinet and attach directly to Model
PF6 Flex Blower using 8" round duct.
Kit can be rotated so that the exhaust
is not directly at your feet. Includes
recirculation filter and decorative cover
plate.
MODEL AFCD
RECIRCULATION FILTER
REPLACEMENT
Replacement filter for ANKD Non-Duct
Recirculating Kit. Use to effectively
capture cooking contaminants.
MODEL AVDKD8
1-7/8" X 19" TO 8" ROUND
TRANSITION
Rectangular to 8" round transition for
left, right, below or rear exhaust - using
Model PF6 Flex Blower. Can be attached
to downdraft unit or rectangular duct
(AEDD2). Includes S-clips for easy,
secure attachment.
MODEL AVDKD10
1-7/8" X 19" TO 10" ROUND
TRANSITION
Rectangular to 10" round transition for
left, right, below or rear exhaust - using
external blower. Can be attached to
downdraft unit or rectangular duct
(AEDD2).
MODEL AVDKD219
RECTANGULAR ADAPTER
FOR 1-7/8" X 19"
Use to connect 1-7/8" x 19" rectangular
duct directly to downdraft when using
side, below or rear exhaust.
HA0141