Specification Sheet

ManualsBrandsBest ManualsDowndraftsBest Cattura 48" Brushed Stainless Steel Downdraft

Page 1

SPECIFICATIONS

REFERENCE QTY. REMARKS Project

Location

Architect

Engineer

Contractor

Submitted by Date

Powerful VERTEX

Complete Capture Design rivals the

finest island hoods. Compact design allows the choice of

many cooktop styles, free-standing and built-in ranges for

island or wall applications.

FEATURES

HOUSING:

• Galvanized steel construction

• Left, right, front, below or rear discharge

• Flexible installation - can be used with cooktops, rangetops,

slide-in, and free-standing ranges

• 30", 36", or 48" widths - Fits standard-size cabinets (Some

blower configurations may require deeper cabinets.)

•

For indoor domestic use only

CHIMNEY ASSEMBLY:

• Quiet actuation linear drive system

• Chimney rises 18" when activated - ideal for tall pots

• Aluminum mesh filters - easy to remove, dishwasher-safe

• 304 stainless steel chimney - makes cleanup quick and

easy

• 4-speed capacitive-touch control, with delay off and filter

clean reminder

• Heat Sentry™ adjusts speed of blower in case of excess

heat

• 2-level LED task light. 7W (30"), 14W (36"), 18W (48")

• Up to 100% capture - equal to comparable island hoods

TRIM / DOOR:

• Low profile

• 304 stainless steel construction

• Articulating door to hide chimney when retracted

• Integrated, capacitive-touch UP button

BLOWER (sold separately):

• Compatible with quiet and efficient 600 cfm Flex Blower -

Model PF6

•

Permanently lubricated, thermally-protected motor

•

Neoprene, resilient anti-vibration mounts

• Can be mounted directly to downdraft or mounted remotely

• Uses standard 8" or 10" round duct

• Can be rotated on housing to exhaust left, right or down

• Compatible with in-line/exterior blower models:

EB6, EB9*, EB12*, EB15*, ILB3, ILB6, ILB9, ILB11*

Recommended models

TYPICAL SPECIFICATION

Downdraft blower system shall be Best

Model D49M30SB,

(D49M36SB), (D49M48SB), (D49M30BLS) or (D49M36BLS).

Unit to have stainless steel housing. Chimney to rise 18" and have

304 stainless steel contruction for ease of cleaning.

Filters to be aluminum mesh, easy to remove and dishwasher-safe.

Flex blower will connect directly to 8" round duct. Remote blower

will connect directly to 10" round duct. Blower to discharge left,

right, front, below or rear.

Motor shall be mounted to blower assembly with grease resistant

anti-vibration mounts, be removable, and lifetime lubricated.

Unit to include Heat Sentry

™

, to adjust blower speed in case of

excess heat.

Unit to include trim / door to hide chimney when retracted.

Downdraft system shall operate on 120 VAC and be able to be

plugged into a standard grounded outlet. It will have a 4-speed

blower control, with delay off, and filter clean reminder.

Downdraft shall include 2-level LED task lighting.

Downdraft blower system to be cULus listed.

SPECIFICATIONS

Volts: 120

Hz: 60

Amps: 3.2

Duct: 8" or 10" Round

CATTURA

DOWNDRAFT

MODELS D49M30SB,

D49M36SB, D49M48SB,

D49M30BLS, D49M36BLS

20B 99045243F

BEST Drummondville, QC, Canada www.BestRangeHoods.ca 866-737-7770

HK0198

NOTE: Dimensions

shown are for reference

only. Before cutting out

countertop, refer to

instructions packed with

downdraft and cooktop.

PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

NOTE: D

IMENSIONS SHOWN

ARE IN INCHES.

BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711

Summary of content (16 pages)

PAGE 1
SPECIFICATIONS Page 1 CATTURATM DOWNDRAFT MODELS D49M30SB, D49M36SB, D49M48SB, D49M30BLS, D49M36BLS TM Powerful VERTEX Complete Capture Design rivals the finest island hoods. Compact design allows the choice of many cooktop styles, free-standing and built-in ranges for island or wall applications.
PAGE 2
PLANNING Page 2 CABINET CUTOUTS ! Flex Blower Ducting – Remote Location Cutout CAUTION: BEFORE CUTTING HOLE IN CABINET FOR DUCTWORK, check for interference with floor joists, wall studs, electrical wiring or plumbing. Below, Side or Rear Ducting Cutouts Appliance Cutout Ce nte r li ne of do wn dra ft /8" 5-7 cm) .9 4 (1 Appliance Cutout 2" ) m 1c (5. Ø8" (20.3 cm) " 21 m) c .3 3 (5 (10 (5321" .3 cm ) (19 7-5 .4 /8" cm ) 24 ( 6 2 -3 / 4 .9 " cm ) 4 " m) c (1 0.2 4 " .2 cm ) 4 (10 " .
PAGE 3
PLANNING Page 3 ELECTRICAL PANEL The unit has a 30-in. power cord with a 3-pronged plug. Plan to provide a grounded outlet within reach of this cord. DOWNDRAFT A 2-7/8" 2-3/4" Countertop B Cooktop Downdraft Front to Back Inside Cabinet Depth Refer to the cooktop installation instructions for dimensions of cooktop, countertop cut-out, and cabinet requirements. However, it is recommended that oversized cabinets be used for easier installation.
PAGE 4
OPTIONAL ACCESSORIES Page 4 OPTIONAL ACCESSORY DESCRIPTION / APPLICATION ACRD ACRDBLS EXTENSION CABLE - 5-FT. Use when you cannot reach the UP/ DOWN Button on the downdraft chimney. Use where electrical panel is remotely mounted. Extends electrical panel cable an additional 5 feet. MODEL AEWD5 Cannot be used where remote control will interfere with cooking, where hot pans could be set, or where hot liquids could be spilled on the control.
PAGE 5
OPTIONAL ACCESSORIES Page 5 OPTIONAL ACCESSORY DESCRIPTION / APPLICATION OPTIONAL ACCESSORY END CAP TRIM EXTENSION +1" WIDTH - LH & RH TRANSITION “Y” (2) - 8" ROUND TO (1) - 10" ROUND Use left and right to increase the overall trim width by 1". Galvanized steel construction. MODELS ATTD1 HJ0123 ATTD1BLS MODEL AVDKD8810 FRONT PANEL ROUGH-IN PLATE 8" ROUND Use where 8" round duct or elbow attaches to front of airbox (Model PF6 remote blower installation).
PAGE 6
OPTIONAL ACCESSORIES Page 6 MODELS ATTD1 OR ATTD1BLS End Cap Trim Extensions (Increases trim width 1-inch to 31, 37, or 49 inches.) MODEL ATKD30SB, 36, 48 Range Trim Kit (Option to fill gap between range and downdraft.) MODEL ATSKD30, 36, 48 Gas Cooktop Seal Kit (Recommended for use with gas cooktops.
PAGE 7
SYSTEM DIMENSIONS Page 7 7.500 5.750 SIDE DUCTING AVDKD10 1-7/8” X 19” TO 10” RD. TRANSITION 30.000 36.000 48.000 PF6 FLEX BLOWER 12.750 11.560 7.500 6.000 24.000 PF6 FLEX BLOWER 12.750 FRONT 11.586 SIDE FRONT 19.000 OUTLET 4.240 12.750 7.320 OUTLET 5.272 10.310 AVDKD8 1-7/8” X 19” TO 8” RD. TRANSITION AEDD2 1-7/8” X 19” RECTANGULAR DUCT 27.152 33.152 45.152 11.586 INLET 5.000 24.000 7.976 14.048 15.952 3.
PAGE 8
INTERNAL BLOWER (PF6) - FRONT MOUNTED TO DOWNDRAFT Page 8 • Flex Blower (PF6) attached to front of Downdraft in cabinet • Ducted to Wall Cap or Non-Duct Recirculation Kit MODEL PF6 Flex Blower (sold separately) (“Down” discharge shown. Blower can also be rotated for “Left” or “Right” discharge.
PAGE 9
INTERNAL BLOWER (PF6) - REMOTE MOUNTED - FRONT OUTLET Page 9 • Ducting connected to front of Downdraft • Flex Blower in cabinet - or - in remote, in-line location • Ducted to Wall Cap MODEL ACVPD8 8-inch Round Front Rough-in Plate (sold separately) MODEL 432 * 8-inch Round Elbow Electrical Panel (Can be mounted in remote location) MODEL 408 * 8-inch Round Straight Duct MODEL AEWD5 5-foot Extension Cable (sold separately) (Only required if electrical panel is mounted in a remote location more than 2-fe
PAGE 10
INTERNAL BLOWER (PF6) - REMOTE MOUNTED - SIDE OUTLET Page 10 • Ducting connected to right side of Downdraft (Ducting connects to left side or rear of downdraft in same manner.) • Flex Blower mounted in a side cabinet or other remote, in-line location • Ducted to Wall Cap or Non-Duct Recirculation Kit MODEL AVDKD219 * 1-7/8-inch x 19-inch Rectangular Adapter (sold separately) (Only required to extend duct along back of cabinet.
PAGE 11
INTERNAL BLOWER (PF6) - REMOTE MOUNTED - REAR OUTLET Page 11 • Ducting connected to rear of Downdraft • Flex Blower in side cabinet or other remote, in-line location • Ducted to Wall Cap or Non-Duct Recirculation Kit 18” min.
PAGE 12
INTERNAL BLOWER (PF6) - REMOTE MOUNTED - BELOW OUTLET Page 12 • Ducting connected below Downdraft • Ducted to Wall Cap or Non-Duct Recirculation Kit MODEL AEWD5 5-foot Extension Cable (sold separately) (Only required if electrical panel is mounted in a remote location - more than 2-feet away from downdraft. Use up to 2 extension cables connected together.) Electrical Panel (Can be mounted in remote location.
PAGE 13
EXTERIOR OR IN-LINE BLOWER - FRONT OUTLET Page 13 • EB15 Exterior Blower is recommended for all rangetops or cooktops with grill & any 48-inch wide rangetop or cooktop • Ducting connected to front of Downdraft • 10-inch round duct connected to In-Line or Exterior Blower MODEL ACVPD10 10-inch Round Front Rough-in Plate (sold separately) MODEL AEWD5 5-foot Extension Cable (sold separately) (Only required if Electrical Panel is mounted in a remote location - more than 2-feet away from downdraft.
PAGE 14
EXTERIOR OR IN-LINE BLOWER - SIDE OR REAR OUTLET Page 14 • EB15 Exterior Blower with dual duct (see page 16) is recommended for all rangetops or cooktops with grill & any 48-inch wide rangetop or cooktop • Ducting connected to side or rear of Downdraft • 10-inch round duct connected to In-Line or Exterior Blower 18” min.
PAGE 15
EXTERIOR OR IN-LINE BLOWER - BELOW OUTLET Page 15 • EB15 Exterior Blower is recommended for all rangetops or cooktops with grill & any 48-inch wide rangetop or cooktop • Ducting connected below Downdraft • 10-inch round duct connected to In-Line or Exterior Blower MODEL AEWD5 5-foot Extension Cable (sold separately) (Only required if electrical panel is mounted in a remote location - more than 2-feet away from downdraft. Use up to 2 extension cables connected together.
PAGE 16
EXTERIOR OR IN-LINE BLOWER - DUAL DUCT - SIDE OUTLETS Page 16 • EB15 Exterior Blower is recommended for all rangetops or cooktops with grill & any 48-inch wide rangetop or cooktop • Ducting connected to right and left sides of Downdraft (Ducting may be connected to either side & rear of downdraft in same manner.