Installation Guide

24
Optional Accessories
Accessory Description
MODELS
ACRD
ACRDBLS
REMOTE UP/DOWN CONTROL
Use when you cannot reach the UP/
DOWN Button on the downdraft chimney.
Can be located on counter top, face of
cabinetry or on the side cabinet of an
island. Cut-out size: 2 1/4" H x 2" W.
Cannot be used where remote control
will interfere with cooking, where hot
pans could be set, or where hot liquids
could be spilled on the control.
(Remote wiring connects with 6-pin
connection)
MODELS
ATSKD30
ATSKD36
ATSKD48
GAS COOKTOP SEAL KIT
Recommended for use with all gas
cooktops. Includes trim bracket and trim
seal.
30", 36" & 48" widths.
MODELS
MD6T
MD8T
MD10T
MAKE-UP AIR DAMPER
Use to provide make-up air (when called
for) to keep the home comfortable by
allowing the downdraft to operate at
optimum levels.
Directwire design works with select
BEST
®
downdrafts to balance indoor air
pressure by providing interlocked make-
up air; damper opens automatically
when the range hood is activated.
8" & 10" round diameters.
Connects to 2 CONTACTS on
ELECTRICAL PANEL.
MODELS
ATKD30SB
ATKD36SB
ATKD48SB
RANGE TRIM KIT
Use with free-standing range - where a
gap is present between back of range
and downdraft.
30", 36" & 48" widths.
Accessory Description
MODEL AEWD5 EXTENSION CABLE - 5-FT.
Use where electrical panel is remotely
mounted. Extends electrical panel cable
an additional 5 feet.
MODEL ANKD
NON-DUCT RECIRCULATING KIT
Use where ducting is not feasible or
available. Mount to toe kick or base of
a cabinet and attach directly to Model
PF6 Flex Blower using 8" round duct. Kit
can be rotated so that the exhaust is not
directly at your feet. Includes
recirculation  lter and decorative
cover plate.
MODEL AFCD RECIRCULATION FILTER REPLACEMENT
Replacement  lter for ANKD Non-Duct
Recirculating Kit. Use to effectively
capture cooking contaminants.
MODEL AVDKD8
1-7/8" X 19” TO 8" ROUND
TRANSITION
Rectangular to 8" round transition for
left, right, or rear exhaust - using Model
PF6 Flex Blower. Can be attached to
downdraft unit or rectangular duct
(AEDD2). Includes S-clips for easy,
secure attachment.
MODEL AVDKD10
1-7/8" X 19" TO 10" ROUND
TRANSITION
Rectangular to 10" round transition for
left, right, or rear exhaust - using
external blower. Can be attached to
downdraft unit or rectangular duct
(AEDD2).
MODEL AVDKD219
RECTANGULAR ADAPTER FOR
1-7/8" X 19"
Use to connect 1-7/8" x 19" rectangular
duct directly to downdraft when using
side, below or rear exhaust.
Optional Accessories
MAKE-UP
AIR DAMPER
CONTACTS