Install Guide

- 13 -
OPERATION
Note: Avoid using food products
that produce  ames near downdraft.
Controls (Fig.21)
Button “—” : Pressing this button for more than 2
seconds turns the blower o .
Pressing the button quickly while the blower is on
will decrease the blower speed.
Button “+”: Pressing this button for more than 2
seconds turns the blower on.
Pressing the button quickly while the blower is on
will decrease the blower speed.
LED 1, 2 and 3 display the speeds.
Function Timer 10 Minute
After pressing the button “+” for more than 2
seconds, the 10 minute timer will be activated.
The LED of the current speed begins to blink, to
show this function. After 10 minutes the blower
will be turned o . Changing the speed while the
Timer is on, will NOT deactivate this function. To
deactivate this function, press button “+”for more
than 2 seconds.
Filter alarm
Filter ALARM 30H: after 30 hours of operation, the
alarm for cleaning the grease filter, will turn on.
Once activated, the  lter alarm will be displayed
for 30 seconds each time the downdraft is turned
o . This alarm is displayed by the #2 LED and will
blink or remain on.
To reset the alarm, press and hold the “-” button
for 2 seconds. The #2 LED will blink twuice, ve-
rifyng the downdraft has been reset.
Auto-O Timer
After 10 hours on continuous blower operation
without user interaction, the downdraft will auto-
matically turn the blower o .
FIGURE 21