Specification Sheet

1106392A 01/22
BESTRANGEHOODS.COM
USA 800-558-1711
BESTRANGEHOODS.CA
CANADA 800-567-3855
HBN1 Series
HOOD SIZES*
Internal Blower, Single - Depth: 11-7/16"
24" HBN1246SS
30" HBN1306SS
* For exact dimensions, please refer to the technical drawing of each model.
FEATURES
Finish Brushed Stainless Steel (Grade 430)
Lighting Type LED
Number of Lamps 2 LED modules
Lighting Levels 3
Lighting Lamps Included Yes
Control Type 4-speed Electronic
Soft Touch
Control Features Heat Sentry™, Delay Off,
Voice Control, Smart Sense,
Filter Clean Reminder
Filter Type Hybrid Baffle Filters
Non-ducted Capability Yes
HOOD BLOWER INCLUDED
Max Blower CFM* 650
ACCESSORIES
ADA Kit HAWRK5
Fillers for cabinet depth HADTBN24 (for HBN1246SS)
adjustment 13" - 15" HADTBN30 (for HBN1306SS)
(set of 4)
Universal MUA Damper MD6TU, MD8TU or MD10TU
Power Cord kit HCK44
Non-Duct Kit HARKPM21
INSTALLATION REQUIREMENTS
Amps @ 120V 4.0
Electrical Connection Direct Wire
Duct Size 6", 8", or 3
1
/4" x 10"
Duct Direction Vertical (round and rectangular) or
Horizontal (rectangular only)
Backdraft Damper Included
*MAX Blower CFM indicates the performance of the hood blower in open air.
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures
prescribed by the Home Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at .01 in. and 0.25 in. static
pressure at high speed based on tests conducted in an HVI-approved state-of-the-art
test laboratory. Sones are a measure of humanly-perceived loudness, based on
laboratory measurements.
HVI PERFORMANCE
SONES
Duct Orientation
Normal
Speed
Medium/
Low*
Medium/
High*
High Speed
0.1 in. w.g.
6" round Vertical 0.4 1.1 3.5 10.0
8" round Vertical 0.4 1.1 3.0 9.5
3
1
/4" x 10" Vertical 0.4 0.9 3.0 9.5
3
1
/4" x 10" Horizontal 0.4 0.9 3.0 9.5
CFM
Duct Orientation
Normal
Speed
Medium/
Low*
Medium/
High*
High Speed
0.25 in. w.g.
High Speed
0.1 in. w.g.
6" round Vertical
120 180 280 540 560
8" round Vertical
120 180 290 580 600
3
1
/4" x 10" Vertical
130 180 290 560 580
3
1
/4" x 10" Horizontal 120 180 290 560 580
* Where noted performance rating is not HVI certified but was established in accordance
with HVI Standardized test procedure.
AIRFLOW PERFORMANCE
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0 100 200300 400500 60
0700
Stac pressure (in. w.g.)
Airflow (cfm)
PM-600
Vercal High Speed,
6-in. round

Vercal High Speed,
with 3¼ in. x 10 in. damper
Horizontal High Speed,
with 3¼ in. x 10 in. damper

Vercal High Speed,
8-in. round
HG0171A
Installation height above the cooking surface: 24"–30"
BUILT-IN HOOD
55 22
LIMITED
WARRANTY
YEARS ON PARTS YEARS ON LABOR
/
HK0344
Dimensions shown in inches.
If needed, ask a
recommended installer
tolimit discharge to
300 or 400 CFM.