Specification Sheet

PIK MOUNTING
SIZE OF THE CUT-OUT
NOTE: The 3 1/2’’ notch must be cut only if the WCPI
optional wall control will be installed.
HH0040A
1 1/2”
HD0093A
17 1/16''
16 3/8''
32 1/2'' or 44 1/2''
3 1/2''
2 1/4'' min.
NOTE: If optional L series liner is used, refer to installation
instructions for size and location of the cut-out.
HL004
1
RMP Series Backsplash
(Stainless Steel wall
covering with warming
shelves. Optional)
L3336, L3342, L4548 or L4560
Custom Hood Liner (optional)
Model 418
10” Rd
adjustable elbow
(optional)
Model 415
7” Rd adjustable
elbow (optional)
8” Rd
adjustable elbow
(optional)
Model 412
transition
(3 1/4” x 10” to 7”)
Adapter and damper
3 1/4’’ x 10’’
(supplied with P5
and P8 blowers)
Adapter and damper
3 1/4’’ x 14’’
(supplied with P8 blower)
Model P5
single-blower
(500 cfm)
PIK33 OR PIK45
INSERT
PIK33 AND PIK45
INSERT SYSTEM
Model EB6 (600 cfm)
or EB9 (900 cfm)
exterior blower
Model EB12 (1200 cfm)
or EB15 (1500 cfm)
exterior blower
Flow deviator
(supplied with
P5 and P8 blowers)
Model 647
(7” Rd wall cap)
Model 634 or 644
(roof cap)
Model 643
(8” Rd wall cap)
Model 421
(10” Rd. vert.
in-line damper)
8” Rd
standard
duct
Model 407
(7” Rd x
24’’ section)
7” Rd metal
flexible duct
(optional)
8” Rd metal
flexible duct
(optional)
Model 413
transition
(3 1/4” x
10” to 8”)
Model 459 transition
(3 1/4” x 14” to 8”)
Model 410
(10” Rd duct
- 2ft. sections)
10” Rd metal
flexible duct
(optional)
Exterior blower rough-in kit
(included with EB6, EB9,
EB12 and EB15 blowers
Model P8
dual-blower (900 cfm)
NOTE: The dual blower P8 can be
installed either with 7’’ round
or 8’’ round ductwork.
For optimal air and quiet sound
performance, use 8’’ round ductwork.
Rough-in kit
(supplied with P5 and P8 blowers)
ALP30, ALP36,
ALP42, ALP48 or ALP60
Ambient light panel (optional)
WCPI
Wall control
(Optional)
Suggested Custom Hood Internal Framework
RMP Series Backsplash
Stainless Steel wall covering
with warming shelves.
Widths available: 36”, 42”, 48”, 60”
(optional)
ALP36, ALP42,
ALP48 or ALP60
Ambient light panel (optional)
L3336, L3342, L4548 or
L4560, L3336S, L3342S,
L4548S, L4560S Custom
Hood Liner (optional)