Installation Guide

- 17 -
FIG. 25
FIG. 26
INSTALL FILTERS
DUCTED AND NON-DUCTED HOODS
NOTE: prior to use, remove protective fi lm
from the fi lter frame.
1. To remove the GREASE fi lter, push in
latch tab to disengage the fi lter from the
hood. Tilt the fi lter downward and remove
(Fig.25).
2. To install the GREASE fi lter, align rear
fi lter tabs with slots in the hood. Push
latch tab in, push fi lter into position and
release. Make sure the fi lter is securely
engaged after installation.
NON-DUCTED HOODS ONLY
1. To remove the CHARCOAL fi lter, grip and
push fi lter tab toward rear of hood. Pull the
fi lter down to disengage the rear fi lter tabs
(Fig.26).
2. To install the CHARCOAL fi lter, align fi lter
in rectangular opening. Push fi lter against
springs in rear of hood and press into place.
Make sure the fi lter is securely engaged
after assembly.
3. Install GREASE fi lter after charcoal fi lter is
installed.
4. The charcoal fi lter replacement model is
AFCWC345.