Installation Guide

- 13 -
FIG. 15
INSTALL FILTERS
NOTE: Prior to use, remove protective fi lm
from the fi lter frame.
1. To remove the GREASE fi lter, (Fig.15) push
the fi lter towards the front so that it clears the
fi lter channel, then pull down on the handle
to disengage the fi lter from the hood. Tilt the
fi lter downward and remove.
2. The grease fi lters (see page 5 for cleaning
instructions) should be cleaned frequently.
Use a warm detergent solution. Grease
fi lters are dishwasher safe.
3. To install the GREASE fi lter, align rear fi l-
ter tabs with spring in the hood. Pull down
handle, push fi lter into position and release.
Make sure the fi lter is securely engaged
after installation.