Specifications

Bluegiga Technologies Oy

Page 60 of 64

14.3.1 Co-location with Other Transmitters

Co-location means co-transmission, not physical co-location. The radios are not considered to be in colocation

when the physical separation is more than 20 cm or if the transmissions overlap less than 30 seconds.

When two or more radios are in co-location human exposure must be evaluated as the sum of TX powers

from all the radios transmitting simultaneously. The FCC grant of WT32i does not allow co-location so it will

require authorization through C2PC, Change of ID or a new certification.

14.4 IC Certification of an End Product

IC certification is much like FCC. In IC there are two types of product authorizations:

 Verification

 Certification

When using a modular certified WT32i all that is needed, provided that WT32i is the only radio in the design,

is labelling the end product with “Contains IC: 5123ABGTWT32I”. The responsibility for the radio certification

remains with Bluegiga but the end product manufacturer is still responsible for the verification of the remaining

parts of the product.

Two main differences that are good to be aware of are:

 If the TX power is less than 20 mW human exposure evaluation is not required

 The test reports are valid for 1 year from the certification

14.5 MIC Japan Certification of an End Product

WT32i has MIC Japan type certification and it can be used directly in the end product without need for

recertification of the end product. Currently there aren’t any labelling requirements for an end product using a

certified module but it is recommended to place some indication to the product that it contains certified radio

module.

15 WT32i Certifications

15.1 Bluetooth

TBA

15.2 CE

WT32i is in conformity with the essential requirements and other relevant requirements of the R&TTE

Directive (1999/5/EC). The product is conformity with the following standards and/or normative documents.

 EMC (immunity only) EN 301 489-17 V2.1.1

 Radiated emissions EN 300 328 V1.8.1

 Safety EN60950-1:2006+A11:2009+A1:2010+A12:2011