User guide

ManualsBrandsBeStar ManualsHardwareBFB624B

BFB624B

BS/TEA01.040B

TianAn Industry Park4/F,Site B ChangZhou New District

Tel:86-519-5103228

Fax:86-519-5131010

Http:www.be-star.com

E-Mail:bestarco@pub.cz.jsinfo.net

1.Description

2.Application

3. Features

4.Wiring

5. Warning

6.Engineering Specifications

7.Specifications

8.Mounting options

9. Installation Instructions

10. Load test

Approval:

Product No. 210101

BeStar Model Name

Issue Date

Issue No.

Customer P/O

Customer

04/11/17

FIRE BELL

No.

Chec.

Prepared Appr.

Contents

04/08/02

Revision

Date

04/11/17

Summary of content (4 pages)

PAGE 1
FIRE BELL Customer Customer P/O BeStar Model Name BFB624B Product No. 210101 BS/TEA01.040B Issue No. 04/11/17 Issue Date Approval: 1.Description 2.Application 3. Features 4.Wiring 5. Warning 6.Engineering Specifications 7.Specifications 8.Mounting options 9. Installation Instructions 10. Load test Prepared Chec. Appr. Revision No. Date 0 04/08/02 1 04/11/17 Contents 2 3 TianAn Industry Park4/F,Site B ChangZhou New District Tel:86-519-5103228 Fax:86-519-5131010 Http:www.be-star.
PAGE 2
BeStar 6 H 5 4 3 2 1 BFB624B H 1.Description: BFB624B Indoor/Outdoor bells utilize a specially designed gong, that gives out a loud mechanical resonant tone. This improvement designed to make the whole series mare effective and provide performance and dependability at a low current consumption.The bell design incorporates a micro-motor with built-in varistor suppression element, to reduce RFI and EMI interference found in today's highly integrated microprocessor driven control panels.
PAGE 3
BeStar 6 H 5 4 3 2 1 BFB624B H 5. Warning Conductor Size (AWG), Length and capacity should betaken into consideration prior to design and installation of these products. Particularly in retrofit installation. G G This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd. and shall not be used in whole or in part without its written content 6.Engineering Specifications: F The alarm indicating appliance shall be AMSECO model or equivalent device.
PAGE 4
BeStar 6 5 4 3 2 1 BFB624B H H 9. Installation Instructions: 1) To install bell, first remove the gong using the hex key provided. 2) Use elther of the two sets of mounting holes to allow installation to 50mm& 60mm pitch mounting boxes. 3a) When mounting on to mounting box use the wiring access slot. 3b) When wall mounting wire in from the top ensuring wiring will not foul the gong. 4) During installation,always ensure that the terminal block is at the top.