Instruction Manual

This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
and shall not be used in whole or in part without its written content
B
6
A
45 3
C
2 1
A
B
C
D
E
F
G
H
6 45 3
D
E
F
G
12
1.Description
1.1 Acoustic component Performance Specification
1.2 The present document specifies performance requirements
for the acoustic characteristics of speaker
www.be-star.com [e-mail]
Drawn by:
Drawn
Rev.
Date
Approved by:
Checked by:
Note
Date:
Page:02 of 08
A
2.Characteristics
2.1 Electrical and Mechanical Characteristics
No. Item Specification
1. Dimension Ø 25 x 4.5 (mm)
2. AC Impedance 4 Ω±15%(at 1KHz/1Vrms)
3. Rated Input Power 1.5W(2.45Vrms)
4. Maximum Input Power 2.0W(2.83Vrms)
5. Resonance Frequency 500Hz ±20%
6. Frequency Response F0~20KHz
7. S.P.L 85±3dB/0.1m/0.1W at F0~2KHz
8. THD ≤2% (at 1.0~10KHz/0.1W)
9. Buzzes & Rattles Must be normal at sine wave 2.45Vrms
10. Polarity Positive voltage to (+),Diaphragm moves forward
11. Operating Temperature -20~+ 70°C
12. Storage Temperature -40~+ 85°C
13. Weight ~3.1g±0.3g
Speaker
2010/10/12
2010/10/12
BMS25-11-04H4.5 LF
DRG NO: BS/TES01.1078A
BMS25-11-04H4.5 LF
Speaker
Mic
Audio
Analyser
Power Amplifier
10cm
0.1W(0.63Vrms)
2.2 Test Method
Anechoic chamber
博 士 達
李红元
王 平
王文邦
王文邦