Instruction Manual

DRG NO:BS/TET01.681A
11/09/15
常琦
张秀琴
魏奉玲
Remark:
1)100pcs/tray
2)30tray/carton
3)3000 pcs/carton in total
4)carton size 50x27x26cm
常琦
BMT0905XH5.5 LF
A
11/09/15
BMT0905XH5.5 LF
5.Notice
5.1 The products mustn't be washed
5.2 Storage Condition
The products should be stored in the room ,where the temperature/humidity is stable. And avoid
suchplaces where there are large temperature changes. Please store the products at the following
conditions:
Temperature: -10 to + 40 °C Humidity: 15 to 85% R.H.
5.3 Expire Date on Storage
Expire date (Shelf life) of the products is six months after deliveried under the conditions of a sealed and
an unopened package. Please use the products within six months after deliveried.
If you store the products for a long time (more than six months), use carefully because the products may
be degraded in the solderability and/or rusty.Please confirm solderability and characteristics for the
products regularly.
5.4 Notice on Product Storage
(1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may be reduced at quality, and/or be degraded in the
solderability due to the storage in a chemical atmosphere.
(2) Please use the products immediately after the package is opened, because the characteristics may
be reduced at quality, and/or be degraded in the solderability due to storage under the poor condition.
Approved by:
Checked by:
Drawn by:
Rev.
A
DrawnDate
Note
Transducer
www.be-star.com [e-mail]
2 1
A
Page:6 of 7
FF
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
and shall not be used in whole or in part without its written content
B
Date:
C
B
C
D
E
D
E
G
H
G
H
2 1
4. Packing