Owner's manual

This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
and shall not be used in whole or in part without its written content
www.be-star.com [e-mail]
6 5 4
A
Rev.
Date Drawn
Drawn by:
Note
Checked by:
Approved by:
Date:
B
C
D
Page:4 of 5
3 2 1
Transducer
BMT1612H14 LF
A
B
C
D
E
F
G
BMT1612H14 LF
H
6 5 4
E
F
G
H
3 2 1
4.Packing
A
B 07/06/19
02/06/20
胡海青
魏奉玲
DRG NO: BS/TET01.032C
5.1 The products mustn't be washed
5.2 Storage Condition
The products should be stored in the room ,where the temperature/humidity is stable. And
avoid suchplaces where there are large temperature changes. Please store the products at
the following conditions:
Temperature: -10 to + 40°C Humidity: 15 to 85% R.H.
5.3 Expire Date on Storage
Expire date (Shelf life) of the products is six months after deliveried under the conditions of a
sealed and an unopened package. Please use the products within six months after
deliveried.
If you store the products for a long time (more than six months), use carefully because the
products may be degraded in the solderability and/or rusty.Please confirm solderability and
characteristics for the products regularly.
5.4 Notice on Product Storage
(1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic
gas, Sulfides and so on), because the characteristics may be reduced at quality, and/or be
degraded in the solderability due to the storage in a chemical atmosphere.
(2) Please use the products immediately after the package is opened, because the
characteristics may be reduced at quality, and/or be degraded in the solderability due to
storage under the poor condition.
5.Notice
1)50pcs/tray
2)40trays/carton
3)2000 pcs/carton in total
4)carton size 50x28x34cm
08/12/18
魏奉玲
徐 波
王文邦
C
08/12/18
魏奉玲
ROHS
add mashing label