Owner manual

65 C 90-95% RH
25 C 90-95% RH
-40 C
+25 C
+85 C
+25 C
Checked by:
Approved by:
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
and shall not be used in whole or in part without its written content
A
REV.
6
5
Date Drawn
4
Note
Drawn by:
C
B
Date:
D
456
E
F
G
H
www.be-star.com [e-mail]
3
2 1
Page:4of 8
A
C
B
D
3 2 1
E
F
G
H
Notice: All specification must be satisfied in this condition except SPL. SPL shall be 77dB or more.
3.8 Vibration Test
Vibration Frequency 10~200~10Hz
Time 15min
Acceleration 5g
Direction x.y &z 2h (total 6hrs)
3.9 Drop test
Height 150cm(drop to concrete floor)
Direction one time in each 6 planes(total of 6 times)
3.10Solderability
Temperature of soldering pot 255±5℃
Duration 2 ±0.5sec
3.11Pin lead strength
Force 10N
Duration 10±1sec
All these tests above should be measured after leaving normal temperature for 4hrs.
3.1 High temp. storage life test
Temperature +85 ℃
Duration 96hrs
3.2 Low temp. storage life test
Temperature -40 ℃
Duration 96hrs
3.3 Life test in normal temperature
Power supply Rated voltage
Duration 96hrs
3.4 Temperature shock test
Cycles 14
3.5 Humidity cycle test
Cycles 10
3.6 High temp. life test
Temperature +85°C
Duration 96hrs
3.7 Low temp. life test
Temperature -40°C
Duration 96hrs
3.Reliability Test
15min15min30min 30min
12h1h
1h
Transducer
SMT1010-3.6H3.5-01 LF
DRG NO: BS/TET01.573A
魏奉玲09/04/15A
09/04/15
魏奉玲
徐 波
陶红仲
12h
SMT1010-3.6H3.5-01 LF