Owner manual

6.1 The products mustn't be washed
6.2 Storage Condition
The products should be stored in the room ,where the temperature/humidity is stable. And
avoid such places where there are large temperature changes. Please store the products
at the following conditions:
Temperature: -10 to + 40°C Humidity: 15 to 85% R.H.
6.3 Expire Date on Storage
Expire date (Shelf life) of the products is six months after deliveried under the conditions of a
sealed and an unopened package. Please use the products within six months after deliveried.
If you store the products for a long time (more than six months), use carefully because the
products may be degraded in the solderability and/or rusty.Please confirm solderability and
characteristics for the products regularly.
6.4 Notice on Product Storage
(1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic
gas, Sulfides and so on), because the characteristics may be reduced at quality, and/or be d-
egraded in the solderability due to the storage in a chemical atmosphere.
(2) Please use the products immediately after the package is opened, because the character-
istics may be reduced at quality, and/or be degraded in the solderability due to storage under
the poor condition.
5
Drawn
5
6.Notice
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
and shall not be used in whole or in part without its written content
A
REV.
6
Date
B
C
D
E
F
G
H
6
A
Checked by:
www.be-star.com [e-mail]
Approved by:
4
Note
3 2 1
Page: 7 of 8
Drawn by:
Date:
B
C
D
E
F
G
H
4 3 2 1
Transducer
SMT1010-3.6H3.5-01 LF
DRG NO: BS/TET01.573A
魏奉玲09/04/15A
09/04/15
魏奉玲
徐 波
陶红仲
SMT1010-3.6H3.5-01 LF