Owner manual

adhesive tape
inner carton
2000 pcs inside
inner dimension:
350mm×350mm×45mm
Outer carton
10000 pcs(5pcs inner carton)
inner dimension:
380mm×280mm×370mm
plastic-reel
2000pcs of buzzers/one reel
H
G
F
E
4 3 2 1
D
C
B
A
1
Page:08 of 09
2
Transducer
34
Note
Approved by:
Checked by:
Drawn by:
www.be-star.com [e-mail]
Date:
H
G
F
E
6
7.Notice
D
C
B
6
Date
A
REV.
This print and information there in are proprietary to Bestar Electronics Industry Co., Ltd.
and shall not be used in whole or in part without its written content
BESTAR ELECTRONICS INDUSTRY CO.,LTD
5
Drawn
5
7.1 The products mustn't be washed
7.2 Storage Condition
The products should be stored in the room ,where the temperature/humidity is stable. And
avoid such places where there are large temperature changes. Please store the products at
the following conditions:
Temperature: -10 to + 40 C Humidity: 15 to 85% R.H.
7.3 Expire Date on Storage
Expire date (Shelf life) of the products is six months after deliveried under the conditions of a
sealed and an unopened package. Please use the products within six months after deliveried.
If you store the products for a long time (more than six months), use carefully because the
products may be degraded in the solderability and/or rusty.Please confirm solderability and
characteristics for the products regularly.
7.4 Notice on Product Storage
(1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic
gas, Sulfides and so on), because the characteristics may be reduced at quality, and/or be d-
egraded in the solderability due to the storage in a chemical atmosphere.
(2) Please use the products immediately after the package is opened, because the character-
istics may be reduced at quality, and/or be degraded in the solderability due to storage under
the poor condition.
SMT5050-03H03-02 LF
SMT5050-03H03-02 LF
博 士 達
A
08/03/07
徐 波
陶红仲
DRG NO: BS/TET01.530B
B
09/08/06 魏奉玲
高 正
魏奉玲
09/08/06
characteric
standardized