User's Manual

6
or unplugged (any cable).
 Please ensure Bestboard is
secured on a stable surface to
avoid damage by falling or flame
 Never place Bestboard at places
that:
5. Expose Bestboard directly
to sunlight, moisture, heat,
coldness, or dust.
6. store or deploy flammable
material
7. contains flammable or
corrosive gas
8. is served as bathroom or
kitchen.
substance on power cord and wall socket
before connecting.
 Please do not disqualify the power cord by:
5. modifying power cord
6. placing power cord underneath heavy
load
7. placing power cord in the vicinity of
any heat source
8. instead of the connector itself, holding
the power cord cable to remove it
from wall socket
 The output current of HDMI connector with
MHL function is 500mA
 The output current of USB 2.0 port is 500mA
 The output current of USB 3.0 port is 1A
 The output power of OPS docking interface
is 130W
Attention
 Do not place Bestboard in places with
moisture or drippling liquid.
 Do not insert any object into Bestboard.
 Do not place heave object on the top of
Bestboard.
 Do not place Bestboard in places which
are not flat or could become askew.
 Do not expose Bestboard in direct
sunlight, or in the vicinity of heater or
other source of heat and strong light.
 Do not place Bestboard close to any
device with strong radiation
 Scrambling onto Bestboard is not
allowed.
 In case of displaying the content for a long
time or some texts or icons are constantly
present at the same location on the screen,
afterimage could occur, even after the unit
has been turned off for a long period of
time. Such is not covered under the
warranty.
 Removing power cord from the wall socket
or the unit itself is equivalent to cutting the
main power.
 In case LCD is broken and the internal liquid
is spilled onto your skin, please rinse
immediately with running water for 15
minutes and consult your doctor.