Product Manual

10
STEP BY STEP ASSEMBLY
3
Engage the brakes. Remove the bolts
from the bottom of the mast and base. Pull
the mast to an upright position. Re-insert
the bolts into the holes at bottom of the
mast and tighten the nuts.
1
Attach boom to top of mast.
Re-insert the bolts into the
holes at bottom of the mast
and tighten the nuts.
A.
Attach the bottom actuator to
the bracket on the mast and insert
pin. Insert keeper ring through
hole in pin to secure base of ac
-
tuator.
B.
Attach the top of the actuator to
the bracket on the boom and insert
pin. Insert keeper ring through hole
in pin to secure actuator to upper
bracket.
2
B.
A.