Product Manual

13
EMERGENCY STOP FOR
PERFORMANCE
ELECTRONICS ONLY
Emergency stop button interrupts
the power supply to the actuators
and makes the actuators stop
immediately in case of sudden
danger. press RED buttonturn
RED button clockwise
*IT’S STRONGLY RECOMMENDED THAT THE BUTTON IS PRESSED DOWN WHEN THE LIFT WILL
NOT BE USED FOR OVER 3 DAYS TO MAINTAIN OPTIMAL BATTERY LIFE AND PERFORMANCE.
FEATURES OF POWER PLUG:
C-CLAMP :
• when the battery is being charged, insert this C-clamp to secure the power plug
WATERPROOF COVER:
• when control is not being used, the cover should be closed
REMOVE AND INSERT BATTERY PACK:
REMOVE : press button A and pull out in the up direction (Fig.1)
INSERT: • Insert the battery pack into control box as show in Fig. 2 & 3.
• While pressing the release/latch button A, slide the battery pack into control box in the downward
direction and ensure battery pack latch hooks onto the top of the control box.
• Once the battery pack is hooked onto the control box, release button A.
FOR PERFORMANCE E-D SERIES
(extra wall-mount charger and battery pack)
50%
50% Battery
Capacity Remaining
Charge batteries
immediately.
25%
25% Battery
Capacity Remaining
Charge batteries
immediately.
10%
Battery is charged to
around 10%
Buzzer beeps / Only
lowering possible
0%
Power off
Battery Volume
Overused
low battery
Battery Low
(Blink)