User`s manual

10. Edit Track (for CD only)
Rackmount DVD/CD Duplicator User’s Manual 13
10. Edit Track (for CD only)
The Edit Track functions enable you to create and copy a collection of songs from
different audio discs.
10.1 CD to CD Edit
You can use this function to copy tracks from one or more discs and burn them to
a CD-R.
The
CD to CD Edit function enables you to select specific tracks from various
audio discs, combine them to create a collection of songs, and copy the collection
to blank CD-R/CD-RW discs.
1. Insert a source disc into the source optical drive and a blank CD-R disc into
the target drive.
2. Switch to function
[10.1 CD to CD] by pressing the button.
3. Press the
(ENT) button.
The LCD panel displays the following:
Selecting a Track from the First CD
4. Press the (ENT) button again.
The LCD panel displays the following:
In this example, the indicator “1/10” refers to the first (1) of 10 tracks. The
value “03:25” indicates the duration of the track.
Note: The CD+G value must be set to OFF before you can use the Track
Extraction feature. For more information, refer to “12 Advanced Setup (Adv
Setup)” on page 20.
Note: CD-R discs support up to 80 minutes of audio. Therefore, the number of
tracks that can be copied onto a single disc depends on the length of each
individual track.
10-01. Edit Track
CD to CD Edit
Select Track:
1/10 03:25