User`s manual

11.10 Eject Disc
Rackmount DVD/CD Duplicator User’s Manual 19
11.10 Eject Disc
The
Eject Disc setting controls the ejection of discs by the target drive. Three
options are available:
•
Eject Good Only – This option ejects only successfully copied discs. This is
the default setting
•
Eject All Disc – This option ejects successful and failed copy discs.
•
Do Not Eject – With this option, the disc remains in the target drive. Manual
ejection is required after every copy operation.
11.11 Burn on the Fly
The
Burn on the Fly function enables you to control the copy operation. When the
setting is
ON, data is copied directly from the source DVD to the target DVDs.
When the setting is
OFF, the DVD/CD Duplicator first loads the data into a
partition on the hard disk drive, then copies the data to the target DVDs.
11.12 Burn Mode
The
Burn Mode setting enables you to select from two writing methods for CD-R
media:
• Disc At Once (DAO)
• Track At Once (TAO)
DAO
is the default setting.
11.13 Display Time
The
Display Time function displays the total time of each copy operation. The
default setting is
OFF.
11.14 Button Sound
The
Button Sound setting turns the button sound on or off. The default setting is
ON.
11.15 Device Info
The
Device Info function displays information for both the source and target
drives.