User Manual BestGot BT6002 Bluetooth headset
Welcome to your new BestGot wireless headphones We appreciate your choice of BestGot headphones, before use, please read this user manual carefully and keep for future reference. If you need technical support for any problem, please get in touch with us on email. Important Safety Information Don’t use the headphones at a high volume for any extended period to prevent hearing damage. Don’t use the headphones while driving or in any environment requiring your full attention.
4. Select “BestGot BT6002” from the found Bluetooth devices. (If asked for a password or PIN code, enter “0000”). 5. Once successfully paired and connected, you will hear “connected”. Note: If pairing is not successful within 120 seconds, the blue and red light blinks and the headphones are out of pairing mode. Please turn off the headphones and try pairing again. Turning the headphones on Press and hold the MF Button until you hear “Power on” or you see the red and blue light comes on.
When you are on call, to end it: press the MF Button once. To reject a call When you hear a ringtone, there is an incoming call. To reject it : press and hold the MF Button for 2 seconds. To redial the last number Press the MF Button twice, you will hear a beep and the redialing process begins. Voice dial (must be supported by your mobile phone) Play/Pause Button twice, you will hear a beep.
2. Headphones cannot be turned on. Solution: The battery runs low. Recharge the battery. 3. Can the battery be replaced ? Solution : The battery is non-detachable and cannot be replaced. 4. Can the headphones be used while driving ? Solution : Don’t use the headphones in an environment that requires your special attention. 5. Bluetooth connection is suddenly interrupted within 10 meters. Solution : Check if there is metal or other material interfering with the transmission. 6.
Input Voltage: 5V Input Current: ≥1A Power: ≤20mW FCCSTATEMENT: ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowing twoconditions: (1)Thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay causeundesiredoperation. Warning:Changesormodificationsnotexpresslyapprovedbythepartyresponsiblefor compliancecouldvoidtheuser'sauthoritytooperatetheequipment.
